Bang & Olufsen 10 Speaker User Manual


 
25
Your television has a built-in 
Sleep Timer which means that 
you can make it switch off after 
a designated number of minutes.
Also you can make the television 
react to a Play Timer programmed 
on an Audio or Video Master 
connected to the television via 
MasterLink.
NOTE! For safety reasons, the stand
will not turn if the TV is switched on
by a Play Timer.
Set the television to switch itself on or off
Play Timer
If you connect a Bang & Olufsen audio
or video product to your television with
a Master Link cable, you can exclude or
include it in timed functions via the
PLAY TIMER menu. For example, set the
television’s PLAY TIMER menu to ON and
an audio system’s Play Timer to OFF if
you wish timed functions to apply only
to the television.
To switch on the Play Timer …
> Bring up the TV SETUP menu and highlight 
PLAY TIMER. 
> Press the centre button to bring up the 
PLAY TIMER menu, and highlight TIMER 
ON/OFF. 
> Press the centre button to bring up the 
TIMER ON/OFF menu. 
> Use the navigation button left or right to 
reveal ON. 
> Press the centre button to store the 
setting.
For further information about how to
program Timers and switch the Play Timer
on or off for a connected Bang & Olufsen
audio or video product, see the Guide
enclosed with the product.
Sleep Timer
You can make the television switch off
automatically after a number of minutes.
To activate the Sleep Timer with
Beo4*
1
> Press LIST and use the navigation button 
up or down to bring up SLEEP in the Beo4 
display.
> Press the centre button repeatedly to 
select the number of minutes.
To deactivate the SleepTimer with
Beo4 …
> Press LIST and use the navigation button 
up or down to bring up SLEEP in the Beo4 
display.
> Press the centre button repeatedly until 
OFF is shown on the television screen.
To activate or deactivate the SleepTimer
with Beo6 …
> Press Sleep and select the number of 
minutes or Off.
To set the Sleep Timer via the menu …
> Bring up the TV SETUP menu and highlight 
SLEEP TIMER. 
> Press the centre button to bring up the 
SLEEP TIMER menu.
> Press the centre button repeatedly to 
switch between the number of minutes 
and OFF.
1
*If you have a Beo4 without navigation
button, SLEEP may not be available.