Filter
Top Products
23
You can select the speaker
combination that suits the source
you are using, provided that the
various speaker modes are available
in your television.
NOTE! If you have no external speakers
connected or only a subwoofer, you will
only be able to choose SPEAKER 1.
Daily use of speaker combinations
– BeoVision 10-32
You can choose between three speaker
modes depending on which source you
are using and which speakers you have
connected to your television.
> Press LIST and use the navigation button
up or down to bring up SPEAKER in the
Beo4 display (Beo6: Press to bring up
the Scene display on Beo6, then press
Speaker to bring up the Speaker display).
> Press 1–3 to select the speaker
combination you want. (Beo6: Press
Optimise or Mode 1 – 3). The selected
speakers cut in automatically.
> Press and hold BACK to remove SPEAKER
from the Beo4 display and return to the
source you were using. (Beo6: Press to
remove the Speaker display).
Adjust speaker balance with
Beo4
You can temporarily adjust the balance
between the speakers …
> Press LIST and use the navigation button
up or down to bring up SPEAKER in the
Beo4 display and press the centre button.
> Now use and to adjust the speaker
balance left and right.
> Press BACK to remove SPEAKER from the
Beo4 display and return to the source you
were using.
SPEAKER 1
SPEAKER 1
SPEAKER 2
SPEAKER 3
You can preset two default speaker
combinations which suit the source you are
using, see page 22.
Select speakers for movie sound