Filter
Top Products
System Setup Procedure
A. Shelf Use Setup (For Table / Desktop Use)
- The main unit can be placed on a flat surface either with or without the supplied pedestal. See below.
- Place the main unit on a flat stable surface as shown. There are rubber legs on the
bottom of the unit which will help stabilize it and protect the table from scratches.
- Avoid placing the unit on metal surfaces as it may cause interference with
frequencies or stations.
- Leave at least 6” of space around the unit for ventilation.
PANEL
COVER
Remove this panel cover from the
bottom of the main unit.
Step 1:
Install the supplied pedestal stand to the bottom
of the main unit as shown. Make sure that the
stand is fully and securely fitted and does not
come off when the main unit is picked up.
Place the unit on a flat stable surface. Remember
to keep adequate ventilation space all the way
around the unit to prevent overheating.
Step 2:
Desktop use with supplied pedestal stand
Desktop use without pedestal stand
20