Filter
Top Products
Normal CD Operation - cont.
- The CD player can be programmed to play up to 64 tracks (songs).
- Always press the Stop key before programming.
- Press the Program key once, the display will show the memory symbol to indicate that the set is now
programmed into the CD player.
- There are different procedures for programming a CD and a MP3 CD. Read how below:
Programming Procedure For Normal Audio CD:
- Press Next or Back key to select the song you would like to program.
- Press the Program button once to confirm your selection.
- For each additional song you would like to program, repeat steps listed above. Reminder, only 64 tracks
can be programmed to play at once.
- Once all songs are programmed, press the Program key. The display will now show memory to indicate
you have saved a program into memory.
- Press Play key. The CD will start to spin and play your selected tracks in the program.
- To clear out your programmed tracks, simply press the Stop key. This will reset the memory and clear
the program.
Programming Procedure For MP3 CD:
- Press the Next or Back key to select the Album (folder directory) number which contains the song you
wish to program.
- Press the Program key to confirm.
- Press the Next or Back key to select the song number.
- Press the Program key to confirm.
- Repeat the last 4 steps, each time selecting an Album and track number to be played into your CD
program.
- After a maximum of 64 tracks have been programmed, press Play key.
- To clear out the memory of your selected programmed songs, simply press the Stop key.
- This unit is capable of displaying the “Text Information” (ID3 Tag) of an MP3 song on the LCD.
- To turn on this function, simply press and hold the Find/Display key for 2 seconds.
- To switch back to normal display mode (display track number and timer) press and hold the Find key
again for 3 seconds.
Text Display Mode (ID3)
13
Normal CD Operation - cont.