Filter
Top Products
is most useful when traveling in a new area
where you are not familiar with the local
stations.
bqbq
bqbq
bq STATION PRE-SET MEMORIES
To set any of the 6 pre-set memories in each
band, use the following procedure:
1. Turn the radio on and select the desired
band.
2. Select the first station to be pre-set
using the MANU/SKIP
bm tuning
controls.
3. Press the pre-set button to be set
and continue to hold it in for
approximately 2 seconds. The pre-
set number, will appear on the
display panel to the right of the
frequency indication and a single
beep will sound, indicating that the
station is now set into that pre-set
memory position. The station can
now be recalled at any time by
pressing that button.
4. Repeat the above procedure for the
remaining 5 pre-sets on that band
and for the other 4 bands on the unit.
brbr
brbr
br VACUUM FLOURESCENT DISPLAY
(VFD)
The Vacuum Fluorescent Display (VFD)
panel displays the frequency, time, and
activated functions using one of three
illumination levels as selected by the
POWER/ILL button
1.
bsbs
bsbs
bs POWER LEVEL METER DISPLAY
This display consists of a left and right six-
bar graph which provides a visual
representation of the audio signal level. As
the signal increases, the number of
illuminated segments will increase and vice-
versa.
btbt
btbt
bt
MODE SELECTOR (MODE)
This button is used to select the radio, CD
player, auxiliary (AUX) input or CD changer
(if installed) playback mode. Each press of
the button will select a different mode as
indicated on the display panel.
During CD player operation, this button may
be used to change to radio, CD player, AUX
input (MP3 or external CD player) or CD
changer mode without ejecting the disc. The
DISC indication will remain on the display
panel to show that the CD changer is
operating. Press the button again to return
to return to the desired mode.
bubu
bubu
bu DISC SLOT
With the front panel in the fold-down position,
gently insert the disc into the slot (label
surface facing up) until the soft-loading
mechanism engages and pulls the disc in.
The S--CDP indication will appear on the
display panel for 5 seconds. The (
)
indication illuminates and becomes
animated, the
symbol lights, and the track
number appears on the display panel.
CAUTION: This unit is designed for play of
standard 5" (12cm) compact
discs
ONLY. Do not attempt to
use 3" (8cm) CD-Singles in this
unit, either with or without an
adapter, as damage to the player
and/or disc can occur. Such
damage will not be covered by
the Warranty on this product.
clcl
clcl
cl TRACK SELECT ( / )
The Track Select function of the TUNE/
SEEK/TRACK buttons are used to quickly
access the beginning of a particular track
when a disc is in play. Each time the Forward
TRACK Select (
) side of the button is
pressed, the next higher track number will
99
99
9
OPEROPER
OPEROPER
OPER
AA
AA
A
TT
TT
T
ING INSTRUCING INSTRUC
ING INSTRUCING INSTRUC
ING INSTRUC
TT
TT
T
IONSIONS
IONSIONS
IONS