Filter
Top Products
CCW to decrease the bass response, or CW
to increase it as desired.The level will be
shown on the display panel from a minimum
BAS --10 to a maximum of BAS 10 (BAS 00
indicates flat response). The display will
automatically return to the normal indication
5 seconds after the last adjustment or when
another function is activated.
55
55
5 TREBLE CONTROL
To adjust the treble level, first select the
Treble mode by pressing the SEL button
3
so the TRB indication appears on the display
panel. Within 5 seconds of choosing the
Treble mode, rotate the AUDIO ADJUST
control
2 CCW to decrease the treble
response or CW to increase it as desired.
The level will be shown on the display panel
from a minimum TRB--10 to a maximum of
TRB 10 (TRB 00 indicates flat response).
The display will automatically return to the
normal indication 5 seconds after the last
adjustment or when another function is
activated.
66
66
6 LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first
select the Balance mode by pressing the
SEL button 3 so the BAL indication appears
on the display panel. Within 5 seconds of
choosing the Balance mode, rotate the
AUDIO ADJUST control 2 CCW to adjust
the stereo balance to the left channel
speakers or CW to adjust it to the right
channel speakers. The balance position will
be shown on the display panel from BAL
10 L (full left) to BAL 10R (full right). When
the volume level between the left and right
speakers is equal, L=R will be shown on
the display panel. The display will
automatically return to the normal
indication 5 seconds after the last
adjustment or when another function is
activated.
77
77
7
FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first
select the Fader mode by pressing the SEL
button
3 so the FAD indication appears on
the display panel. Within 5 seconds of
choosing the Fader mode, rotate the
AUDIO ADJUST control
2 CCW to adjust
the front-rear speaker balance to the front
speakers or CW to adjust it to the rear
speakers. The fader position will be shown
on the display panel from FAD 10R (full rear)
to FAD 10F (full front). When the level
between the front and rear speakers is equal,
F=R will be shown on the display panel. The
display will automatically return to the
normal indication 5 seconds after the last
adjustment or when another function is
activated.
88
88
8 LOUDNESS CONTOUR (LOUD)
When listening to music at low volume
levels, this feature will boost the bass and
treble ranges to compensate for the
characteristics of human hearing. Press and
hold the BAND/LOUD button for more than
2 seconds to activate this feature; the LOUD
ON indication will appear on the display panel
for 5 seconds, and LOUD will also appear
and remain. Pressing the button again for
more than 2 seconds will deactivate the
feature (LOUD OFF indication will appear
on the display panel for 5 seconds, and
LOUD will also disappear).
99
99
9 AUDIO MUTE SELECTOR (MUTE)
Press this button momentarily to mute the
volume from the system ( MUTE will appear
blinking on the display panel). Pressing the
button again or adjusting the AUDIO
CONTROL
2 level will return to the volume
level setting in use before the Mute function
was activated.
77
77
7
OPEROPER
OPEROPER
OPER
AA
AA
A
TT
TT
T
ING INSTRUCING INSTRUC
ING INSTRUCING INSTRUC
ING INSTRUC
TT
TT
T
IONSIONS
IONSIONS
IONS