Filter
Top Products
Attach a mounting bracket to each side of the RRU, using the 4 Phillips Round Head
Screws (4mm x 8mm).
Mount the unit in place, using 4 Self-tapping Screws (5mm x 15mm), w/Flat Washers and Lock
Washers. Use RTV (silicone sealer) on screw threads or around the holes to prevent moisture
intrusion.
3.
9
1.
PROCEDURE for VERTICAL INSTALLATION of the RRU
2.
Determine the mounting location and drill 4 x 1/8” (4mm) mounting holes.
NOTE: If mounting surface is carpeted, use caution when drilling holes to prevent drill bit from
catching on carpet. Cut holes in carpet before drilling into subsurface.
Bracket
RRU
Phillips Head Screws (4mm x
8mm) used in 4 places
RRU
Bracket
Carpet
Self-tapping Screw
(5mm x 15mm), w/Flat
Washers and Lockwashers
used in 4 places
WARNING
Never mount the unit near the fuel tank.
Carpet
4x 1/8” (4mm)
mounting holes