Audiovox XM-RCV Satellite Radio User Manual


 
6
TYPICAL AUXILLARY AUDIO SYSTEM
INSTALLATION
ANT.
TO CAR
R
AUDIO OX
TER. SAT. L
AUDIO OUT
R DIN OUT
TO RADIO
ANT.
POWER
TO RRU
AUDIO OX
SATELLITE RADIO RF MODULATOR
LTO SCU
AUDIO OX
SFT
1
7
4
0
32
98
5
6
NOTE: “A” To Satellite Radio Antenna
(Sold separately)
*Green =Terrestrial connection
*Yellow = Satellite connection
NOTE: “B” RCA to RCA Cable (supplied
with system) used to connect the RRU Audio
Ouput to the Radio Reciever Auxilary Input.
-or-
RCA to 1/8” Stereo Plug Cable (not supplied
with system) used to connect the RRU Audio
Output to the Radio Reciever Auxilary Input.
IMPORTANT - Some vehicles use a special dual antenna “Diversity" system.
If the vehicle into which this system is being installed has this type of antenna
system, the antenna cable will not fit the socket on the FM modulator. Use
of the SRXM-001 system with “Diversity" systems is not recommended. You
may also find some cars have an antenna plug that is too small to mate with
the socket on the FM modulator. If this is the case, call Audiovox’s Toll-Free
Assistance for a special adaptor. This adaptor can also be purchased at most
car stereo installation centers.
NOTE: “C” Before routing the Din Cable to
connect the FM Modulator to the RRU,
observe the color code to avoid any
unnecessary re-work. The Gray connector is
matched to the FM Modulator and the Black
connector is matched to the RRU.