Filter
Top Products
PROCEDURE for HORIZONTAL INSTALLATION of the RRU
SYSTEM INSTALLATION
3.
RADIO RECEIVER UNIT (RRU)
2.
Determine the mounting location and drill 4x 1/8” (4mm) mounting holes.
NOTE:If mounting surface is carpeted, use caution when drilling holes to prevent drill bit from
catching on carpet. Cut holes in carpet before drilling into subsurface.
1.
Attach the mounting brackets to each side of the RRU, using the 4 Phillips Round Head
Screws (4mm x 8mm).
Mount the unit in place, using 4 Self-tapping Screws (5mm x 15mm), w/Flat Washers and
Lock Washers. Use RTV (silicone sealer) on screw threads or around the holes to prevent
moisture intrusion.
Bracket
Phillips Head Screws (4mm x
8mm) used in 4 places
8
RRU
Bracket
Self-tapping Screw
(5mm x 15mm), w/Flat
Washers and Lockwashers
used in 4 places
Carpet
WARNING
Never mount the unit near the fuel tank.
Carpet
4x 1/8” (4mm)
mounting holes