Filter
Top Products
-10-
bu FRONT HIGH-PASS CROSSOVER SWITCH
This 4-position slide switch allows you to select the high-pass
crossover point for the front speakers at 200Hz, 150Hz, 100Hz
or FULL (Full Range) during 2-way and 3-way operation. The
frequencies above the setting of this control will be passed
through the crossover to the HIGH PASS OUT FRONT R/L
jacks. Make this selection as appropriate for the
midrange-to-tweeter crossover frequency of the speaker
system being used.
cl SUBWOOFER LOW-PASS CROSSOVER SWITCH
This 4-position slide switch allows you to select the low-pass
crossover point for the subwoofer speakers at 120Hz, 100Hz,
80Hz or 50Hz. The frequencies below the setting of this control
will be passed through the crossover to the SUBWOOFER
OUT R/L jacks. Make this selection as appropriate for the
subwoofer crossover frequency of the speaker system being
used.
cm IN-LINE POWER FUSE
The circuitry of the PEQ-200 is protected from damage by a
1-Amp automotive-type fuse in-line with the constant +12V dc
power input, and housed within the fuse box of the power
harness assembly. The use of fuses with incorrect ratings
may cause serious damage to the unit. If the fuse blows
constantly, carefully check all electrical connections to the
unit.