Filter
Top Products
-5-
the cassette in and play begins (the TAPE , cassette symbol,
PLAY and direction arrow will appear on the display panel). If the
cassette being played requires Metal tape playback equalization,
the setting will automatically be selected as indicated by MTL on
the display panel. When the cassette reaches the end on the
side of the tape being played, the unit will automatically change
direction of play as shown by the arrow indications on the
display panel.
NOTE:Observe cassette operation cautions in Care and
Maintenance section of this manual.
cm FAST-FORWARD BUTTON ( )
FAST-FORWARD AUTOMATIC MUSIC SEARCH
A momentary press of this side of the button will activate the
Fast-Forward function which will cause the tape to rapidly move
in the forward direction of play (FF and or will appear
on the display panel). To stop Fast-Forward movement, press
the Fast-Forward button again or the Program Selector co and
normal play will resume.
Pressing and holding the Fast-Forward side of the button for
longer than 2 seconds will activate the Fast-Forward Automatic
Music Search function (AMS-F and or will appear on the
display panel). The unit will automatically fast-forward to the
beginning of the next selection and begin play. To stop Music
Search function at any point, press the button again or the
Program Selector co and normal play will resume.
cn REWIND BUTTON ( )
REWIND AUTOMATIC MUSIC SEARCH
A momentary press of this button will activate the Rewind function
which will cause the tape to rapidly move in the reverse direc-
tion of play (REW and or will appear on the display panel).
To stop Rewind movement, press the press the Rewind button
again or the Program Selector button co and normal play will
resume.
Pressing and holding the Rewind side of the button for longer
than 2 seconds will activate the Rewind Automatic Music Search
function (AMS-R and or will appear on the display panel).
The unit will automatically rewind to the beginning of the next
selection and begin play. To stop Music Search function at any
point, press the button again or the Program Selector co and
normal play will resume.
co PROGRAM SELECTOR
Press this button to manually reverse tape direction and play the
other side (program) of the cassette. The change of direction
will be shown by the direction arrows ( or ) on the display
panel.
cp DOLBY NOISE REDUCTION SELECTOR ( )
During tape play, pressing this button will activate the Dolby
B-type noise reduction circuits to eliminate hiss and noise. When
Dolby noise reduction is selected, the indication will be shown
on the display panel. Pressing the button again will deactivate
the Dolby noise reduction and the symbol will disappear
from the display panel.