Filter
Top Products
-4-
bn PRE-SET SCAN TUNING (PSCAN)
Press and hold the up ( ) or down ( ) side of this button for
2 seconds to scan the 6 stations pre-set into the memories on the
AM or FM bands in the selected direction. The unit will stop at
each pre-set station for 5 seconds before continuing to the next
pre-set station. Press the button again momentarily to stop
Pre-Set Scan operation and remain on the selected frequency.
bo LIQUID CRYSTAL DISPLAY PANEL
VIDEO MONITOR
The Liquid Crystal Display (LCD) panel displays the frequency
and activated functions of the radio, tape player and optional CD
changer. It also provides the color video monitor function for the
auxiliary video input.
bp DISPLAY COLOR CONTROL
bq DISPLAY TINT CONTROL
br DISPLAY BRIGHTNESS CONTROL
These controls are used to adjust the picture quality during
auxiliary video input modes. The Color control will adjust the
level of color intensity. The Tint control will adjust the level of
green or red in the picture. The Brightness control will make the
picture brighter or darker.
NOTE:The Color and Tint controls are not functional during
AM/FM radio, tape and CD changer modes. The Brightness
control is functional in these modes.
bs DISPLAY BACKGROUND COLOR SELECTOR (BGCL)
This function is used to select the background color of the
display screen. The button is located behind the front panel so
the panel must be lowered by pressing the tape Eject button cq
or the Display Angle Control bt to access it. Each press of the
button will change the screen color in the following order:
BLUE à GREEN à RED à BLACK
bt DISPLAY ANGLE ADJUSTMENT ( )
This button is used to set the angle of the display panel for the
best viewing. Each tap of the button will adjust the angle by
approximately 8° up to the maximum angle. If the button is held,
the display will continue to open to the maximum position.
Pressing the button when the display is at the maximum angle
will return it to the closed position.
NOTE:The front panel will automically return to the closed
position when the ignition is turned off.
bu DISPLAY RECALL (DISP)
The Display Recall function is used to recall the function and
volume setting display after they have disappeared from the
screen during Auxiliary video input modes. Pressing the button
will bring these displays back to the screen for 5 seconds.
cl CASSETTE DOOR
To access the cassette door, press the Eject button cq so that
the panel drops to its lowered position (this function will operate
when the unit is turned off if the ignition switch is "on"). Hold the
cassette with the exposed tape edge to the right and insert it fully
into the cassette door until the soft-loading mechanism draws