Filter
Top Products
-6-
To stop Fast-Forward movement, press the Program Selector
button bt and normalplay will resume.
bs REWIND BUTTON (REW)
REWIND MUSIC SEARCH SYSTEM
A momentary press of this button will activate the Rewind Music
Search System function(“MSS”, moving bars and flashing “1” will
appear on the display panel). The unitwill automatically rewind to
the beginning of the present selection and begin play. To search
for a particular selection, tap the button until the respective
number (up to 9) flashes on the display panel. For example, to
move backward 3 selections from the present point on the tape
(including the present selection), tap the button 3 times until the
number “3” flashes on the display panel. The unit will rewind
3 selections and begin play. To stop Music Search function at
any point, press the Program Selector button bt or tap the
Fast-Forward button br to reduce the number of the selection
being searched.
Pressing and holding theRewind button for longer than 0.5 seconds
will cause the tape to continually move in the reverse direction of
play (moving bars will appear on the display panel). To stop
Rewind movement, press the Program Selector button bt and
normal play will resume.
bt PROGRAM SELECTOR (PROG)
Press this button to manually reverse tape direction and play the
other side (program) of the cassette. The change of direction will
be shown by the “1” or “2” indication on the display panel.
bu EJECT BUTTON( )
Tape playback is stopped and the cassette is ejected by pressing
this button. Radio or CD changer operation will automatically
resume when the cassette is ejected, depending on which mode
was in operation prior to cassette play.
NOTE: Never leave a cassette engagedin theplayer whennot in
use. Doing so can cause damage to the cassette and/or
mechanism of the unit. Always press the eject button
and remove the cassette before removing the detachable
front panel.
cl RADIO MONITOR (RM)
This feature allows you to listen to the radio section of the unit
during Fast-Forward or Rewind of the cassette. To activate the
function, press the Radio Monitor button so that the “RM”
indication appears on the display panel. Deactivate the function
by pressing the button again so that “RM” disappears from the
display panel.
cm TAPE REPEAT PLAY
When the Repeat button is pressed during tape play, the “RPT”
indication will appear on the display panel and play of the present
tape selection will be repeated until the Repeat Play mode is
canceled by pressing the button again (“RPT” will disappearfrom
the display panel). Repeat Play mode will also be canceled by
activating theFast-Forward br,Rewind bs, Program Selector bt,
orScan co functions.
cn BLANK SKIP (BS)
When the BlankSkip button is pressed during tapeplay (“B.SKIP”
will appear on the display panel), the tape will automatically fast-
forward to the beginning of the next selection whenever a blank
section of longer than 8 seconds on the tape is detected. To turn
the Blank Skip feature off, press the button again (“B.SKIP” will
disappear from the display panel).