Filter
Top Products
-9-
CD CHANGER CONTROLS
Built into this unit are controls to operate an optional CD changer.
Please check with your Prestige car stereo specialist for
recommendations of themodels that will work with this unit.
Adjustment of the audio functions (volume, tone, balance, and fader)
for the CD changer operatein thesame manneras they dofor radio
and cassette play. The following controls will operate the CDchanger
when it is installed and connectedto this unit. Refer to the owner’s
manual included with the CD changer for instructions on the
installation andcorrect loading and use of the CD magazine.
cq MODESELECTOR
With the CD changer connected to the unit, this button is used to
select CD changer operation. To choose CD mode, press the button
until the indication “CdC” appears on the display panel. The
display will then change to indicate the disc number and track
number. Press the Mode button again to change back to radio or
tape operation.
cr & cs DISCSELECT (D+) (D–)
These buttons are used to select the desired disc for play. To
advance to a higher number disc, press the “D+” button cr.To
returnto a lowernumber disc,press the “D–” buttoncs. The number
of the selected disc in play will be shown on the display panel.
ct TRACK SELECT
These buttons are used to quickly select the beginning of a
particular track. With each momentary tap of the Forward Track
Select button (+), the next higher track number will be selected as
shown on the display panel. Similarly, with each momentary tap of
the Backward Track Select button (–), the next lower track number
will be selected.
cu CUE/REVIEW FUNCTIONS
High-speed audible search to any section of the disc can be made
by the Cue and Review functions. Press and hold the Cue button
(+) to advancerapidly in the forward direction or the Reviewbutton
(–) to advance rapidly in the backward direction. During either
function, the elapsed time within each track will automatically be
shown on the display panel.
dl PAUSE/PLAYSELECTOR (
II
)
During disc play, press this button to temporarily stop play of the
disc (“PAUS” indication will flash on the display panel). Press the
button again to resume play of the disc from the point at which it
was stopped. Pause mode will also be canceled by activating the
DiscSelect cr & cs,Track Select ct,or Cue/Review cu functions.
dmTRACK/DISCREPEA T(RPT)
When the Repeat button is pressed, play of the selected track will
be continually repeated (“RPT” will appear on the display panel and
“TRK” will flash). The Track Repeat mode will be canceled by
pressing the Repeat button again (“RPT” will disappear from the
display panel and “TRK” will stop flashing) or by activating the Shuffle
dnorScandofunctions
When the Repeat button is pressedand held longer than2 seconds,
play of the selected disc will be continually repeated (“RPT” will
appear on the display panel and “DISC” will flash). The Disc
Repeat mode will be canceled by pressing the Repeatbutton again
(“RPT” will disappear from the display panel and “DISC” will stop
flashing) or byactivating the Shuffle dn orScan do functions.