Filter
Top Products
-10-
dn TRACK/DISC SHUFFLE(SHF)
When the Shuffle button is pressed, the tracks on the disc will be
played in a random,shuffled order(“SHF” willappear onthe display
panel and “TRK” will flash). The Track Select button cu will also
select tracks in the shuffled orderinstead of thenormal progression.
When all tracks on the dischave been played in shuffled order, the
next disc will be selected in normal order and its tracks played in
shuffledorder. The T rackShuffle mode will be canceled bypressing
the Shuffle button again (“SHF” will disappear from thedisplay panel
and “TRK”will stop flashing) orby activating the Repeatdm or Scan
dofunctions.
When the Shuffle button is pressedand held longer than2 seconds,
both the discs and the tracks will be played in a random, shuffled
order (“SHF” will appear on the display panel and “DISC” will flash).
After all tracks on the disc have been played, the changer will
select a new disc in shuffled order and play its tracks in shuffled
order. The Disc Shuffle mode will be canceled by pressing the
Shuffle button again (“SHF” will disappear from the display panel
and “DISC” will stop flashing) or by activating the Repeat dmor
Scando functions.
do TRACK/DISCSCAN (SCAN)
When the Scan button is pressed, the first 10 seconds of each
track on the disc will be played in order (“SCAN” will appear on the
display panel and the track number will flash). When a desired
track is reached, press the Scan button again and play of that
track will continue (“SCAN” will disappear from the display panel
and the tracknumber will stop flashing). The Track Scan modewill
also be canceled by activating the Disc Select cr & cs, Track
Selectct,Repeatdm,orShuffle dnfunctions.
When the Scan button is pressed and held longer than 2 seconds,
the first 10 seconds of the first track on each disc will be played
(“SCAN” will appear on the display panel and the disc number will
flash). When a desired disc is reached, press the Scan button
again and play of the disc will continue (“SCAN” will disappear from
the display panel and the discnumber will stop flashing). The Disc
Scan mode will also be canceled by activating the Disc Select cr
&cs,TrackSelectct,Repeatdm, orShuffledn functions.
CD CHANGER ERROR CODES
If a problem should develop while operating the CD changer, the
following error codes may appear on the d isplay panel.
EJ: IndicatesthatthereisnomagazineloadedintheCDchanger .
no_d: Indicates that there are no discs loaded in the CD
magazine inthe changer.
E-01, etc.: Indicates an error in the laser reading the disc in slot
#1 of the magazine (E-02 for disc in slot #2, etc.) Eject
the magazine, remove the indicated disc and make sure
it is clean, undamaged,and loadedcorrectly (labelside
up or down as per CDchanger owner’s manual). Clean
and re-load the disc(s) as appropriate and check for
proper operation or try another disc.
E-95: Indicatesa communicationerrorbetween theradio andCD
changer. Check theconnections andcable ofthe changer .
E-99: Indicates excessive temperature conditions at the CD
changer. The error code willgo off and playwill resume
when the temperature at the changer returns to a
normal range.