Filter
Top Products
-12-
ds DISC/TRACK SHUFFLE PLAY (SHF)
When the SHF button is pressed, the DISC and SHF indications will appear on the display panel and the discs in the magazine will be
played in a random, shuffled order, as well as the tracks on each disc. After playing all tracks selected at random from a disc in the
magazine, the unit will select another disc at random and play all the tracks on it in a random shuffled order. This will continue from
disc-to-disc until the Random Disc mode is canceled by pressing the SHF button again or by activating the Scan or Repeat Play
functions.
If a problem should develop while operating the CD changer, the following error codes may appear on the display panel.
ER-1: Indicates that there is no magazine loaded in the CD changer.
ER-2: Indicates a problem with the magazine eject function.
ER-3: Indicates an error in the disc loading function.
ER-4: Indicates an error in the disc unloading function.
ER-5: Indicates an error in the magazine position.
ER-6: Indicates an error in the laser pick-up position.
ER-7: Indicates an error in the laser focus on the disc.
In any of these error situations, try ejecting the CD magazine from the changer and make sure the discs are clean, undamaged, and
loaded correctly (refer to the Owner’s Manual of the CD changer). Re-load the magazine and check for proper operation. You may
also try activating the RESET button cu on the unit, but this will also erase the time and pre-set memories. If the suggested measures
do not solve the problem, contact an approved warranty station near you for further assistance.
CD CHANGER ERROR CODES