Filter
Top Products
128-6196A
9 of 16
99
99
9
conditions, the unit should be left in the stereo
mode as indicated by the ST icon on the
display panel when tuned to an FM stereo
signal. If the stereo signal is too noisy for
comfortable listening, press the MONO/INT
select button to switch to monaural reception
(the ST icon will disappear from the display
panel). To return to stereo reception mode,
press the button again so that the ST
indication reappears.
bn LOCAL (LOC)/REPEAT (RPT) BUTTON
During radio operation, received signals are
usually in stereo mode as indicated by the
ST icon; however, when the signals are weak
or intermittent, it may be worthwhile activating
the Local (LOC) mode by pressing the LOC/
RPT button (LOC appears on the display). This
mode favors access to local stations whose
signals are much stronger; thereby improving
radio reception. Press this button again to
terminate local receive mode; LOC disappears
from the display panel.
bo AUDIO MUTE (MUTE)
This button is used to mute the volume from
the system. By pressing the button, a MUTE
indication will appear on the display panel and
the volume will be muted. Pressing the MUTE
button again, or pressing the Volume Control
buttons, Select (SEL) button, or LOUD button
will return the volume level to the setting in
use before the Mute function was activated.
bp LIQUID CRYSTAL DISPLAY PANEL
FUNCTIONS
The Liquid Crystal Display (LCD) panel dis-
plays the frequency, time, and all activated func-
tions, including five bar graphs which provide a
visual representation of the audio signal power
level.
NOTE: It is a characteristic of LCD
panels that, if subjected to cold
temperatures for an extended
period of time, they may take longer
to illuminate than under normal
conditions. In addition, the visibility of
the numbers on the LCD may slightly
decrease. The LCD read-out will
return to normal when the
temperature increases to a normal
range.
bq DISC SLOT
With the label surface facing up, fully insert a
compact disc into the slot until the mechanism
engages; the EJECT button will pop out,
making it possible to mechanically eject the
disc when desired. The disc symbol ( )
will appear on the display and play will begin
from the first track (01) on the disc,
accompanied by the elapsed time of track
play.
NOTE: This unit is designed for play of
standard 5" (12cm) Compact Discs
ONLY. Do not attempt to use 3"
(8cm) CD-Singles in this unit, either
with or without an adapter, as
damage to the player and/or disc
can occur. Such damage will not
be covered by the Warranty on this
product.
br CD PLAY/PAUSE ( ) SELECTOR
Press this button to resume play of a disc.
Playback will begin from the track being played
previously, and continue until all tracks on the
disc have been played, after which playback
will automatically stop (unless the repeat mode
had been selected).
During disc play, pressing this button will
/
OPEROPER
OPEROPER
OPER
AA
AA
A
TT
TT
T
ING INSTRUCING INSTRUC
ING INSTRUCING INSTRUC
ING INSTRUC
TT
TT
T
IONSIONS
IONSIONS
IONS