Filter
Top Products
temporarily stop play of the disc (the disc
symbol ( ) will flash on the display panel).
Press the button again to resume play of the
disc from the point at which it was stopped.
bs FORWARD TRACK SELECTOR ( )
During disc play, this button is used to quickly
select the beginning of a particular track in the
forward direction. With each press of the button,
the next higher track number will be selected
as shown on the display panel.
bt BACKWARD TRACK SELECTOR ( )
During disc play, this button is used to quickly
select the beginning of a particular track in the
backward direction. With each press of the
button, the next lower track number will be
selected as shown on the display panel.
bu REPEAT PLAY SELECTOR
During disc play, pressing the LOC/RPT button
once will select the track repeat play mode;
pressing the button twice will select the disc
play repeat mode.
To repeat the playback of a desired track, press
the button once; RPT appears on the display
panel. Play of the selected track will continue
to repeat until the Track Repeat function is
canceled by pressing the button twice or by
activating the Intro-Scan function so that the
RPT indication disappears.
To repeat playback of the entire disc, press the
button twice; the DISC RPT indication appears
on the display panel. Play of the disc will
continue to repeat until the Disc Repeat function
is canceled by pressing the button once again,
or by activating the Intro-Scan function; the
DISC RPT indication disappears.
cl INTRODUCTION (INT) SCAN SELECT
During disc play, press the MONO/INT button
to sample or scan the introduction, or first 10
seconds, of each track on the disc. INT appears
on the display, and each track is played in
1010
1010
10
128-6196
10 of 16
order. By using this option, you can quickly
choose the track(s) on the disc that you prefer.
When the desired track is recognized, press
the MONO/INT button again to exit the INT
mode or press the LOUD/RND button for 2
seconds; INT disappears from the display.
cm RANDOM (RND) SELECT
During disc play, press and hold the LOUD/
RND button for 2 seconds to play the tracks
on the disc in a random or shuffled order (RDM
will appear on the display panel). In Random
Play mode, pressing the Forward Track Se-
lect button ( ) will also select tracks in a
random order instead of the normal progres-
sion. Pressing the Backward Track Select but-
ton ( ) will also select tracks in random order.
The Random Play mode can be cancelled
by pressing the button again for 2 seconds
(RDM indication will disappear from the dis-
play panel) or by activating the Track Intro-
Scan function.
cn DISC EJECT ( ) BUTTON
When the button is pressed in, disc play is
stopped and the disc is mechanically ejected;
will disappear from the display panel and
the unit will revert to radio operation. Remove
the disc and insert another disc into the unit
(disc play will begin automatically). Discs may
be ejected with the ignition switch on or off.
NOTE: To prevent an ejected disc from
accidentally being damaged, always
remove the disc from the unit. Do
not leave the disc extending from
the disc slot.
co AUXILIARY (AUX) IN JACK
An audio input jack (AUX IN) for use with a
portable audio device is located on the lower
left front corner of the control panel. Using an
audio patch cable with standard 1/8” phono
plugs (available at most radio supply stores),
attach the audio output from the external player
to the AUX input jack on the unit. By selecting
OPEROPER
OPEROPER
OPER
AA
AA
A
TT
TT
T
ING INSTRUCING INSTRUC
ING INSTRUCING INSTRUC
ING INSTRUC
TT
TT
T
IONSIONS
IONSIONS
IONS