Filter
Top Products
128-6196A
8 of 16
77
77
7
88
88
8
OPEROPER
OPEROPER
OPER
AA
AA
A
TT
TT
T
ING INSTRUCING INSTRUC
ING INSTRUCING INSTRUC
ING INSTRUC
TT
TT
T
I0NSI0NS
I0NSI0NS
I0NS
response as desired. The bass level will be
shown on the display panel from a mini-
mum of B -7 to a maximum of B +7 (bAS 0
represents flat response).The display will
automatically return to the normal indication 5
seconds after the last adjustment or when
another function is activated.
5 TREBLE CONTROL
To adjust the treble level, first select the Treble
mode by pressing the SEL button until the
TRE indication appears on the display
panel. Within 5 seconds of choosing the
Treble mode, press the VOL + or - buttons
to adjust the treble response as desired. The
treble level will be shown on the display panel
from a minimum of TRE -7 to a maximum of
TRE +7 (TRE 0 represents flat response). The
display will automatically return to the
normal indication 5 seconds after the last
adjustment or when another function is
activated.
6 LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first
select the Balance mode by pressing the SEL
button until the bAL indication appears on the
display panel. Within 5 seconds of choosing
the Balance mode, press the VOL + or - buttons
to adjust the audio balance between the right
channel or left channel speakers, respectively.
The balance position will be shown on the
display panel from bA.l 10 (full left) to bA.r 10
(full right). When the volume level between the
left and right speakers is equal, bAL 0 will be
shown on the display panel. The display will
automatically return to the normal indica-
tion 5 seconds after the last adjustment or when
another function is activated.
7 FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance,
first select the Fader mode by pressing the
SEL button until the FAd indication appears
on the display panel. Within 5 seconds of
choosing the Fader mode, press the VOL + or
- buttons to adjust the front-rear speaker levels
as desired. The fader position will be shown on
the display panel from FA.F 10 (full front) to
FA.r 10 (full rear). When the volume level
between the front and rear speakers is equal,
FAd 0 will appear on the display panel. The
display will automatically return to the normal
indication 5 seconds after the last adjust-
ment or when another function is activated.
8 LOUDNESS CONTOUR (LOUD)
When listening to music at low volume levels,
this feature will boost the bass and treble ranges
to compensate for the characteristics of
human hearing. Momentarily press the
LOUD/RND button to activate this feature as
indicated by LOUD on the display panel.
Pressing the button again will de-activate
the function and LOUD will disappear from
the display.
9 AM/FM BAND SELECTOR
During radio play, each time the BAND button
is pressed, the radio band changes. The
indications AM or FM will appear on the
display panel according to your selection.
During CD play, pressing this button will
change to radio operation without ejecting the
disc.
bl MANUAL TUNING CONTROL
Turn this knob clockwise to tune upward in
frequency on the band in use, counter-clock-
wise to tune downward in frequency. The fre-
quency to which you are tuned will be shown in
digital form on the display panel. When tuning
in a station, always adjust the control so that
the correct broadcast frequency is shown on
the display and adjust the control so that you
are receiving a clear signal. If the radio is tuned
off-frequency, you could experience distorted
audio, noise and other reception problems.
bm FM MONO/INTRO (INT) SELECT BUTTON
During FM radio operation, press this button to
select mono or stereo reception of the
broadcast signal. Under normal reception