Filter
Top Products
128-6003A
9 of 20
selected frequency. If no buttons are pressed
during the scan, the unit will return to the
original station before the scan started.
Pressing and holding the button for longer
than 2 seconds will activate the Auto-Store
Tuning feature which will automatically scan
and enter up to 6 stations into the pre-set
memories on each FM band. If you have
already set the pre-set memories to your
favorite stations, activating the Auto-Store
Tuning feature will erase those stations and
enter the new ones. This feature is most
useful when traveling in a new area where
you are not familiar with the local stations.
bq STATION PRE-SET MEMORIES
To set any of the 6 pre-set memories in each
band, use the following procedure:
1. Turn the radio on and select the desired
band.
2. Select the first station to be pre-set
using the TUNE/SEEK/TRACK
Controls
bm.
3. Press the pre-set button to be set and
continue to hold it in for
approximately 2 seconds. The pre-
set numberwill appear on the display
panel (accompanied by a beep)
indicating that the station is now set
into that pre-set memory position. The
station can now be recalled at any time
by pressing that button.
4. Repeat the above procedure for the
remaining 5 pre-sets on that band and
for the other 3 bands on the unit.
br VACUUM FLOURESCENT DISPLAY
(VFD)
The Vacuum Fluorescent Display (VFD)
panel displays the frequency, time, and
activated functions using one of three
illumination levels as selected by the
PWR/ILL button
1.
bs POWER LEVEL METER DISPLAY
This display consists of a left and right six-
bar graph which provides a visual
representation of the audio signal level
applied to the left and right channels. The
illuminated segments of the left and right
channel bar graphs increase and decrease
as a function of the audio signal strength
applied to the left and right channels. As the
signal increases, the number of illuminated
segments will increase and vice-versa.
bt MODE SELECTOR (MODE)
This button is used to select the radio, CD
player, CD changer (if installed) or auxiliary
(AUX) input playback mode. Each press of
the button will select a different mode as
indicated on the display panel.
During CD player operation, this button may
be used to change to radio, AUX input (MP3
or external CD player) or CD changer mode
without ejecting the disc.The
indication
will remain on the display panel to show that
the CD player or changer is operating. Press
the button again to return to CD player mode
and resume play of the disc from the
beginning of the current track.
bu DISC SLOT
With the front panel in the fold-down position,
gently insert the disc into the slot (label
surface facing up) until the soft-loading
mechanism engages and pulls the disc in.
The S--CDP indication will appear on the
display panel for 5 seconds. The (
)
indication illuminates and becomes
animated, the
symbol lights, and the track
number and elapsed time will appear on the
display panel.
88
88
8
OPEROPER
OPEROPER
OPER
AA
AA
A
TT
TT
T
ING INSTRUCING INSTRUC
ING INSTRUCING INSTRUC
ING INSTRUC
TT
TT
T
IONSIONS
IONSIONS
IONS