Filter
Top Products
128-6003A
15 of 20
CD CHCD CH
CD CHCD CH
CD CH
AA
AA
A
NGER CONTRNGER CONTR
NGER CONTRNGER CONTR
NGER CONTR
OLOL
OLOL
OL
S / CD CHS / CD CH
S / CD CHS / CD CH
S / CD CH
AA
AA
A
NGER ERRNGER ERR
NGER ERRNGER ERR
NGER ERR
OR CODESOR CODES
OR CODESOR CODES
OR CODES
1414
1414
14
du DISC/TRACK REPEAT PLAY (RPT)
When the RPT button is pressed, the RPT
indication will appear on the display panel
and play of the selected track will be
continually repeated until the Track Repeat
mode is canceled by pressing the RPT
button again or by activating the Scan or
Shuffle Play functions.
When the RPT button is pressed and held
for more than 2 seconds, the DRT indication
will appear on the display panel and play of
the selected disc will be continually repeated
until the Disc Repeat mode is canceled by
pressing the RPT button again or by
activating the Scan or Shuffle Play
functions.
el DISC/TRACK SHUFFLE PLAY (SHF)
When the SHF button is pressed, the SHF
indication will appear on the display panel
and the tracks on the disc will be played in
a random, shuffled order. The Track Select
button will also select tracks in the shuffled
order instead of the normal progression. The
Shuffle Track mode can be canceled by
pressing the SHF button again or by
activating the Scan or Repeat Play
functions.
When the SHF button is pressed and held
for at least 2 seconds, the DSF indication
will appear on the display panel and the discs
in the magazine will be played in a random,
shuffled order, as well as the tracks on each
disc. After playing the tracks at random from
a disc in the magazine, the unit will select
another disc at random and play all the
tracks on it in a random shuffled order. This
will continue from disc-to-disc until the
Shuffle Disc mode is canceled by pressing
the SHF button again or by activating the
Scan or Repeat Play functions.
If a problem should develop while operating the CD changer, the following error codes may
appear on the display panel.
ER-1: Indicates that there is no magazine loaded in the CD changer.
ER-2: Indicates a problem with the magazine eject function.
ER-3: Indicates an error in the disc loading function.
ER-4: Indicates an error in the disc un-loading function.
ER-5: Indicates an error in the magazine position.
ER-6: Indicates an error in the laser pick-up position.
ER-7: Indicates an error in the laser focus on the disc.
In any of the above situations, try ejecting the CD magazine from the changer and make
sure the discs are clean, undamaged, and loaded correctly (refer to the Owner’s Manual
of the CD changer). Re-load the magazine and check for proper operation. You may also
try activating the RESET button dm on the unit, but this will also erase the time and pre-set
memories.
If the suggested measures do not solve the problem, contact an approved warranty station
near you for further assistance.
CD CHCD CH
CD CHCD CH
CD CH
AA
AA
A
NGER ERRNGER ERR
NGER ERRNGER ERR
NGER ERR
OR CODESOR CODES
OR CODESOR CODES
OR CODES