Filter
Top Products
128-6003A
7 of 20
button to decrease the bass response, or
the
AUDIO CONTROL button to increase
it as desired. The level will be shown on the
display panel from a minimum BAS --10 to
a maximum of BAS 10 (BAS 00 indicates
flat response). The display will automatically
return to the normal indication 5 seconds
after the last adjustment or when another
function is activated.
5 TREBLE CONTROL
To adjust the treble level first select the Treble
mode by pressing the SEL button
3 so the
TRB indication appears on the display panel.
Within 5 seconds of choosing the Treble
mode, press the
AUDIO CONTROL button
2 to decrease the treble response or the
AUDIO CONTROL button to increase it
as desired. The level will be shown on the
display panel from a minimum TRB --10 to a
maximum of TRB 10 (TRB 00 indicates flat
response). The display will automatically
return to the normal indication 5 seconds
after the last adjustment or when another
function is activated.
6 LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first
select the Balance mode by pressing the
SEL button
3 so the BAL indication appears
on the display panel. Within 5 seconds of
choosing the Balance mode, press the
AUDIO CONTROL button 2 to adjust the
stereo balance to the left channel speakers
or the
AUDIO CONTROL button to adjust
it to the right channel speakers. The balance
position will be shown on the display panel
from BAL 10L (full left) to BAL 10R (full right).
When the volume level between the left and
right speakers is equal, BAL L=R will be
shown on the display panel. The display will
automatically return to the normal
indication 5 seconds after the last
adjustment or when another function is
activated.
7 FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first
select the Fader mode by pressing the SEL
button
3 so the FAD indication appears on
the display panel. Within 5 seconds of
choosing the Fader mode, press the
AUDIO CONTROL button 2 to adjust the
front-rear speaker balance to the front
speakers or the
AUDIO CONTROL button
to adjust it to the rear speakers. The fader
position will be shown on the display panel
from FAD 10R (full rear) to FAD 10F (full
front). When the level between the front and
rear speakers is equal, FAD F=R will be
shown on the display panel. The display will
automatically return to the normal indication
5 seconds after the last adjustment or when
another function is activated.
8 LOUDNESS CONTOUR (LOUD)
When listening to music at low volume
levels, this feature will boost the bass and
treble ranges to compensate for the
characteristics of human hearing. Press and
hold the BAND/LOUD button for more than
2 seconds to activate this feature; the LOUD
ON indication will appear on the display panel
for 5 seconds, and LOUD will also appear
and remain. Pressing the button again for
more than 2 seconds will deactivate the
feature (LOUD OFF indication will appear
on the display panel for 5 seconds, and
LOUD will also disappear).
9 AUDIO MUTE SELECTOR (MUTE)
Press this button momentarily to mute the
volume from the system ( MUTE will appear
blinking on the display panel). Pressing the
66
66
6
OPEROPER
OPEROPER
OPER
AA
AA
A
TT
TT
T
ING INSTRUCING INSTRUC
ING INSTRUCING INSTRUC
ING INSTRUC
TT
TT
T
IONSIONS
IONSIONS
IONS