Filter
Top Products
Specifications are subject to change without notice
AtlasSound.com
1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435
©2008 ATLAS SOUND LP Printed in U.S.A. ATS002102 RevD 2/08 PP
OWNER'S MANUAL
CP400 & CP700 COMMERCIAL
POWER AMPLIFIER
8
Unbalanced Input
Unbalanced wiring typically is found on consumer equipment (CD players, DVD players, etc.) and is
generally a compromise of noise rejection and cable lengths. A single conductor and an overall shield
are most common, as in the standard cables supplied with consumer equipment. Keep unbalanced wire
lengths within 10' between equipment, wire the hot lead to the “+” terminal, and the shield to the ground
terminal. Install a jumper wire between the “-” terminal and the ground – a loss of gain will result without
this jumper (Figure 4).
Figure 4
Jumper
White/Red (+)
Shield
White/Red (+)
Shield