Asus DSBV-DX/SAS Home Theater System User Manual


  Open as PDF
of 206
 
ASUS DSBV-DX Series 4-21
4.4.2 Chipset Conguration
This menu shows the chipset conguration settings. Select an item then press
<Enter> to display a pop-up menu with the conguration options.
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
→←
Select Menu Enter Select Sub-Menu F10 Save and Exit
ItemSpecicHelp
EnableConguration/
Memory mapped accesses
to the Crystal Beach
Congurationspace
located in
Device 8, Fn 0, and Fn 1.
ChipsetConguration
CrystalBeachCongureEnable [Enabled]
SERR signal condition [None]
Demand Scrub Enable [Enabled]
Patrol Scrub Enable [Enabled]
4GB PCI Hole Granularity [256 MB]
Memory Branch Mode [Interleave]
Branch 0 Rank Interleave [4:1]
Branch 0 Rank Sparing [Disabled]
Enhanced x8 Detection [Enabled]
ForceITKCongClocking [Disabled]
FBDIMM(s) Thermal Throttling [Closed Loop]
OpenLoopType [UserDene]
Environment Temperature [25 °C]
PhoenixBIOS Setup Utility
Advanced
Crystal Beach Congure Enable [Enabled]
Allows you to enable or disable the Conguration/Memory mapped accesses
to the Crystal Beach Conguration space located in Device 8, Fn 0, and Fn 1.
Conguration options: [Disabled] [Enabled]
SERR signal condition [None]
Allows you to select the ECC error that the SERR# asserts.
Conguration options: [None] [Single bit] [Multiple bit] [Both]
Demand Scrub Enable [Enabled]
Enables or disables the Demand Scrubbing.
Conguration options: [Disabled] [Enabled]
Patrol Scrub Enable [Enabled]
Enables or disables the Patrol Scrubbing.
Conguration options: [Disabled] [Enabled]
4GB PCI Hole Granularity [256 MB]
Allows you to select the granularity of the PCI hole for PCI resource.
Conguration options: [256 MB] [512 MB] [1.0 GB] [2.0 GB]
Scroll down to display the following items:
ChipsetConguration
Temperature Rise [25 °C]
FBDIMM(s) Air Flow [2.0]
ItemSpecicHelp
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →← : Select Menu Enter: Select SubMenu F10: Save and Exit
 previous next