Asus DSBV-DX/C Home Theater System User Manual


 
ASUS DSBV-DX Series 2-1
2.1 Before you proceed
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
Unplug the power cord from the wall socket before touching any
component.
Use a grounded wrist strap or touch a safely grounded object or a metal
object, such as the power supply case, before handling components to
avoid damaging them due to static electricity.
Hold components by the edges to avoid touching the ICs on them.
Whenever you uninstall any component, place it on a grounded antistatic
pad or in the bag that came with the component.
Before you install or remove any component, ensure that the power supply
is switched off or the power cord is detached from the power supply. Failure
to do so may cause severe damage to the motherboard, peripherals, and/or
components.
DSBV-DX
DSBV-DX Series Onboard LED
Blinks OFF
LED1
Normal
Abnormal
ON OFF
SB_PWR1
Standby
Power
Powered
Off
(green)
(green)
Onboard LED
1. Standby Power LED
The motherboard comes with a standby power LED. The green LED lights up
to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a
reminder that you should shut down the system and unplug the power cable
before removing or plugging in any motherboard component. The illustration
below shows the location of the onboard LED
2. SAS LED (for DSBV-DX/SAS only)
The green heartbeat LED blinks per second to indicate that the LSI 1068
chipset is working normally.