Filter
Top Products
ASUS DSBV-DX Series 4-29
The following items appear only if you enable the
Power On By RTC Alarm
item.
RTC Alarm Date [0]
To set the date of alarm, highlight this item and press <Enter> to display a date
chart. Press <+> or <-> to change scroll through the options, then press <Enter>
when done. The default setting [0] is equivalent to everyday alarm.
Conguration options: [0] [1] ~ [31]
RTC Alarm Date [00 : 00 : 00]
To set the time of alarm:
1. Press <+> or <-> to set the desired value.
2. Use the left/right arrow key or press <Tab> to move to the next eld.
3. Press <Enter> when done.
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
→←
Select Menu Enter Select Sub-Menu F10 Save and Exit
ItemSpecicHelp
To select the fan speed
control model.
Hardware Monitor
CPU1 Domain 0 Temperature 39
o
C/102
o
F
CPU1 Domain 1 Temperature 29
o
C/84
o
F
CPU2 Domain 0 Temperature N/A
CPU2 Domain 1 Temperature N/A
SYSTEM1 Temperature 39
o
C/102
o
F
SYSTEM2 Temperature 29
o
C/84
o
F
CPU_FAN1 Speed 3417 RPM
CPU_FAN2 Speed N/A
FRN_FAN1 Speed N/A
FRN_FAN2 Speed N/A
FRN_FAN3 Speed N/A
FRN_FAN4 Speed N/A
REAR_FAN1 Speed N/A
REAR_FAN2 Speed N/A
Smart Fan Control [Smart Fan II]
PhoenixBIOS Setup Utility
Advanced
4.4.8 Hardware Monitor
This menu shows the hardware monitor conguration settings. Select an item then
press <Enter> to display the conguration options.
The following screens appear when you install Intel
®
5000 series CPU.