Ashly VCM-88 Stereo Amplifier User Manual


 
Operating Manual - VCM-88, VCM-88E, RD-8, RW-8 Level Controllers
14
13. Dimensional Drawings
0.79
7.94 (202)








emote
eel
otrol
allountController
0.38

(20)
R-8
RD-8
Remote
Level
Control
1.60




14. Common Applications
• Eight In, Eight Out Individual Channel Remote Control
Use for individual mixer channel or subgroup remote control, especially suited for situations where the audio equipment
rack is installed away from an adequate listening point. Also useful to control monitor levels/mixes from the front-of-
house position. Separate input/output connectors or single jack TRS patch available. Control with RD-8, RW-8,
Custom DC Voltage Controller, AMX or Crestron Touch Screen Systems, or Ashly Protea System Software.
• Eight In, One Out For Remote Control Sub-Mixing
Use up to eight inputs and the Master Output to allow mixdown of all VCM-88(E) inputs. Individual channel pass
through is available to daisy-chain multiple VCM-88(E) units together for personal monitor mixes. Control with RD-8,
RW-8, Custom DC Voltage Controller, AMX or Crestron Touch Screen Systems, or Ashly Protea System Software.
• One In, Eight Out For Remote Control of Distributed Zones
Use Input Channel Patch to internally jump one channel’s input into one or more other inputs for distribution of single
audio signal. Control with RD-8, RW-8, Custom DC Voltage Controller, AMX or Crestron Touch Screen Systems, or
Ashly Protea System Software.
• Limiter With Threshold Control On All Eight Channels
Use VCM-88(E) as stand-alone eight channel, true VCA peak limiter, with adjustable threshold on each channel. No
controller is required.
DiensionalDrainorCM-88anCM-88inInches
0.10 (2.5)
6.00 (152)
17.00 (432)
1.25
1.75
1.15 (29)
(44.5)
(31.8)