Filter
Top Products
30 InfraStruXure System - Installation and Start-Up
6. Install at least one battery module (four
battery units) in the Symmetra PX UPS.
Install battery modules, starting in the lowest
available shelf. Position the battery unit
between the grooves, and slide it completely
into the enclosure.
Heavy: Use two people to lift and install battery units.
Electrical Hazard:
The DC bus in the Symmetra PX UPS is energized when battery
modules are installed, even when the DC Disconnect circuit breaker is open.
7. Install at least one power module in the
Symmetra PX UPS. Install power modules
starting from the lowest available shelf.
Push each module completely into the
enclosure.
Heavy: Use two people to lift and install power modules.
px0012a