Filter
Top Products
Streamer User Guide
Streamer User Guide
Activating your SIRIUS Subscription
Before you can listen to Streamer, you must
subscribe to SIRIUS Satellite Radio’s service.
1. Make sure that Streamer is properly connected
and that its antenna is oriented to receive the
SIRIUS satellite signal (see Installation sections
for details).
2. Press the power button to turn Streamer on.
After displaying the SIRIUS logo, Streamer will
update all SIRIUS channels. The display will read
“UPDATING STREAMS” on the top line and “X%
Completed” (0%-20%-40%-60%-80%-100%) on
the bottom line shall be displayed by the Streamer
until the update completes. NOTE: Don’t push any
buttons or perform any operations until
updating has been completed. Once all updated
SIRIUS channel streams are received, the display
will change to “Call 1-888-539-SIRIUS to
Subscribe” and will place you in SIRIUS Satellite
Radio’s Preview Channel. Channel 184 is the
SIRIUS preview channel. You will not be able to
tune to any other channels until you activate your
SIRIUS subscription.
4. Hit the MENU button to enter the Setup Mode.
5. Turn the Encoder Knob left (counter-clockwise)
until “Sirius ID” is highlighted. Push on the
Encoder Knob to select “Sirius ID”. This will
display your unit’s unique 12-digit SIRIUS ID
Number. This SID number should also be
available on the Streamer packaging. Write the
number down and have your credit card handy.
6. Contact SIRIUS on the Internet at: https://
activate.siriusradio.com/ Follow the prompts to
activate your subscription.
• You can also call SIRIUS toll-free at 1-888-539-
SIRIUS (7474). The operator will instruct you.
Removing Streamer from the Dock
To remove Streamer from the docking station,
press the button on the underside of the unit and
gently slide Streamer out of the cradle. Replace it
by sliding the unit all the way into the cradle so that
the connector at the rear of the unit makes proper
contact in the cradle.
Basic Operation
After you have successfully activated your SIRIUS subscription, the Normal Operation screen will
appear (bottom, right): Use the Encoder Knob select streams.
• The selected stream will automatically play the name and artist of the currently-playing song and will
scroll across the display. If you want to listen to a different entertainment category, push the CATEGORY
button up or down to activate the Category Select screen (top, right):
14
15
1. Use the CATEGORY button to scroll through music
and entertainment categories.
2. When the category (ex. Rock) you want is highlighted,
use the Encoder Knob to highlight the stream you want
to hear.
3. When the stream you want is highlighted, press the
Encoder Knob to listen to the stream. The display will
revert to the Normal Operation screen for that stream.
(bottom, right)
4. If you decide not to select another
stream, press and release the POWER
button to exit the mode. The display will
revert to the Normal Operation screen for
the active stream.
Category
Channel Name001
Channel Name002
Channel Name003
Channel Name004
Channel Name005
Artist Name
Channel Name
Category
A-1
Artist Name
Song Title
001
12:00pm