Filter
Top Products
Streamer User Guide
Streamer User Guide
Time (Default-12:00pm)
Use the Encoder Knob to increase (Clockwise) or
decrease (Counter Clockwise) the alarm set time
in a circular motion on one line in the middle of
the display from the default value (12:00pm). AM or
PM will switch automatically when the AM or PM
threshold has been exceeded. When the desired
time is displayed, press the Encoder Knob.
Program Alert:
When this menu option is highlighted and
selected, you will be able to program the unit to
switch to a selected stream at a specific time. On
the display, Set Stream Alert will occupy the top
text line.
The following adjustments are accessible:
Time/Day (Default-12:00pm, Monday)
Stream (Default-Currently Playing Stream)
Program Alert On/Off (Default-Off)
Time/Day:
Rotating the Encoder Knob toggles between
Time and Day. If Time is selected, use the
Navigation Wheel increase (CW) or decrease
(CCW) the set time in a circular motion on one line
in the middle of the display from the default value
(12:00pm).
AM or PM will switch automatically when the AM or
PM threshold has been exceeded. When the
desired time is displayed, press the Navigation
Wheel.
If Day is selected, the screen displays a default
day of Monday, with selectable choices of Monday,
Tuesday, Wednesday, Thursday, Friday,
Saturday or Sunday. Use the Encoder Knob to
increase (CW) or decrease (CCW) the desired
day in a circular motion on one line in the middle
of the display from the default value (Monday).
Stream:
Rotate the Encoder Knob to scroll through a listing
of all the Sirius streams in a circular motion.
The listing should encompass all 6 available
lines. When the desired stream is highlighted,
press the Encoder Knob.
Program Alert On/Off:
Rotate the Navigation Wheel to toggle between
Program Alert On or Program Alert Off. When the
desired alert status is highlighted, press the
Navigation Wheel.
The following options are available in this mode:
Enabled
Disabled (Default)
Rotate the Encoder Knob to toggle between
Enabled and Disabled. When the desired shut
down status is highlighted, press the Encoder
Knob.
30 31
Auto Shutdown:
In this mode, you have the option of programming
the unit to automatically shut off after a 1-hour
period without any user intervention. After 59
minutes of inactivity, a beep tone sounds, and a
display prompt appears on the screen, stating
Cancel Auto Shutdown.
Press the Navigation Wheel to terminate the
fuction temporarily.
Sleep Mode:
In this mode, you have the capability of
programming the unit to shutdown after a selected
period of time. The screen displays Sleep Mode on
the top line, with optional time settings as follows:
Off
15 min
30 min
45 min
60 min