Filter
Top Products
Streamer User Guide Streamer User Guide
Memory Button (S-Seek Function):
This feature allows the user to capture and store
the current program definition text- PDT (Artist &
Song title) with a total of 20 listings(20 Artist/Song
Title combinations). The unit also has the
capability to search the current incoming Sirius
signal and alert the user when a saved song is
being played.
1. While the Shuttle is in either of the two
standard display modes, momentarily pressing
and releasing the MEMO button stores the current
program data information within the Shuttle’s
memory. A Memory Stored pop-up screen,
followed by “X Used/Y Empty” will each appear for
1 second.
2. By holding down the MEMO button for 3 seconds,
the stored memory information (one at a time) is
displayed on the LCD screen in page format. Use
the Encoder knob to scroll through the 20-page
listing and view the information. This function
allows you to recall information regarding the Artist/
Song Title for your own personal review.
Turning the Encoder Knob highlights the options
and pushing the Encoder Knob selects the
option.The S-Seek option implies S-Seek On/Off,
with the default setting as S-Seek On.
4. Each time the Streamer is turned on, it
automatically searches the incoming signal to
determine if a match exists between the signal
and the currently saved information stored in
receiver memory. If one or more matches are
found, a pop-up screen momentarily appears for 2
seconds and displays the Phrase S-Seek Alert. An
audible beep tone will be heard indicating that a
match has been found.
The display then reverts to the S-Seek Alert screen
which displays the current matches. You can now
select the Artist/Song Title that you wish to listen to.
No stored match alert is provided for the currently
selected stream. To ensure that no duplicate
entries are stored in memory, the receiver will
check the stored input data to ensure the
information about to be stored is not already in
memory.
a. If one or more matches are found, a display list
appears, and allows you to scroll through the
list of songs using the Encoder Knob. Once a song
is found, it can be selected by pressing the
Encoder Knob, and the display will revert to either
of the selected display modes.
20
21
3. Momentarily pressing the Encoder Knob while in
memory recall mode results in a pop-up screen
displaying two selectable options:
Delete
S-Seek
Default Display
Channel Name
Artist Na
Song Title
001
Stored
Category 12:00pm A
Default Display
Channel Name
Artist Na
Song Title
001
X Used / Y Empty
Category 12:00pm A
S-Seek
Delete
Memory Recall
Memory
X/Y
Artist Name
Song Title
Default Display
Channel Name
Artist Na
Song Title
001
S-Seek Alert
Category 12:00pm A