Filter
Top Products
Vehicle Docking Kit Installation Guide for SIR-STRVK1 or SIR-STRVK2 Kit (sold seperately)
Note: Do not put Streamer in the docking station until you have completed the installation.
SIR-STRVK1 Contents:
• Installation Guide.
• Vehicle docking cradle with
wireless FM transmitter.
• Suction Cup Mount.
• Heavy-duty antenna mount (not
shown).
• Cigarette lighter power supply.
• Magnetic roof-mount SIRIUS
antenna.
Installation in a Vehicle (continued)
Streamer User Guide
Streamer User Guide
6
7
SIR-STRVK2 Contents:
• Installation Guide.
• Vehicle docking cradle.
• Base mount.
• Cassette adapter.
• Cigarette lighter power supply.
• Audio cable.
• Magnetic roof-mount SIRIUS
antenna.
Note: The SIR-STRVK1 Kit doesn’t come with the shown cassette
adapter because it has a wireless FM transmitter.
1. Determine where you want to
mount Streamer.
• Do not install Streamer where
it may obstruct your view through
the windshield or your view of
your vehicle’s indicator displays.
• Do not install Streamer where
it will hinder your access to the
vehicle’s controls.
• Do not install Streamer where
it may hinder the function of
safety devices such as an
airbag. Doing so may prevent
the air-bag from functioning
properly in the event of an
accident.
• Find a location that provides
good visibility of and access to
Streamer’s front panel.
• The Brix Group strongly
recommends that you mount
Streamer in a location where the
base can be attached with the
provided screws or on the
windshield with the provided
suction-cup mount.
2. You can bend the leaves on
the base to conform to curved
mounting surfaces.
3. Peel the covering away from
the adhesive on the bottom of
the base and adhere it to the
mounting surface. Use the
provided screws to securely
attach the base to the surface.
• If using screws, be sure that
you do not damage wiring or
other systems on the other side
of the mounting surface.
4. Using the provided screws,
assemble the docking station
cradle to the base or to the
suction cup mount.
5. Plug the cigarette lighter
adapter into the back of the cradle.
Don’t plug the adapter into the
cigarette lighter until the
installation is completed.
6A. Plug the cassette adapter into
the back of the cradle (SIRSTRVK2
kit only). For the SIR-STRVK1 kit,
tune your radio to one of four FM
stations on the side of the vehicle
dock
6B. If your car stereo has an aux
input, plug the supplied audio
cable into the back of the cradle
instead of the cassette adapter.
Plug the audio cable’s white (L
ch,) and red (R ch.) connectors
into your car stereo.