Filter
Top Products
SPECIFICATIONS
GENERAL
Model: American Audio® TTD-2400 - Direct Drive Phono Turntable
System: 2-Speed Direct Drive Phono Turntable Table
Dimensions: 17.72” (W) x 13.7” (D) x 5.4" (H)
450 (W) x 350 (D) x 139 (H) mm
Installation: Place on flat surface or mount in flat case
Weight: 22 Lbs. / 9.5 Kgs
Power supply: AC 115v~60Hz/230v~50Hz
Power consumption: 9W
Environmental conditions: Operational Temperature: 5 to 35˚C (41 to 95˚F)
Operational Humidity: 45 to 85% RH (non-condensation)
Storage Temperature: -10 to 60˚C (4 to 140˚F)
Accessories: Instruction Manual,
Headshell,
45 RPM Adaptor
TURNTABLE SECTION
Type: 2 Speed Fully Manual
Motor: 8 Pole, 2 Phase, Brushless DC Motor
Driving Method: Direct Drive
Turntable Platter: 330 mm dia. Aluminum Diecast
Speeds: 33-1/3 and 45-rpm
Wow and Flutter: Less than 0.15% WRMS (JIS WTD) with 331/3rpm
S/N Ratio: More than 50dB (DIN-B)
Pitch Controls: +/- 10%
Starting Torque: More than 1 kgf.cm
Braking System: Electronic brake
Starting Time: Less than 1 sec.
Braking Time: Less than 1 sec.
Time for Speed Change: Less than 1 sec. from 33 to 45 rpm.
Less than 1 sec. from 45 to 33 rpm.
High of Cue (first track): 6~10 mm
Descend of Cue: 5 sec.
TONEARM SECTION
Type: Static balanced straight shaped tonearm with detachable headshell
Effective Arm Length: 220mm
Overhang: 10mm
Tracking Error Angle: Less than 3 degree
Tracking Force Adjustment Range: 3-4g
Applicable Cartridge Weight: 6-10g
Anti-skating Range: 0-7g
Output: 1.5-3.6mV at 1KHz 5cm/sec
Frequency Response: 20Hz - 20KHz
Channel Separation: More than 15 dB
Channel Balance: Within 2.5dB at 1KHz
Needle Pressure range: 2.5g
SPECIFICATION
DESCRIPTIONS UNIT NORMAL LIMIT
Output Difference:: dB 2.3 2.54
Output Level: mv 1.7~3.5 1.5~3.6
Speed (Speed Range) +/- 10% Hz 2.7K ,3.3K 2710 ,3290
Speed (Center Range) Hz 2995~3005 2990~3010
Wow and Flutter % 0.13 0.15
Channel separation dB 16 15
©American Audio® - www.americanaudio.us - TTD-2400™ Instruction Manual Page 15