Filter
Top Products
horizontally (floats freely).
6. Return the TONEARM (9) to the arm rest and lock it in place.
7. Hold the COUNTERWEIGHT (16) stationary with one hand and rotate only the stylus-pressure ring
to bring the number “0” of the ring into alignment with the center line on the tonearm rear shaft.
8. Rotate the COUNTERWEIGHT (16) clockwise until the scale value corresponding to the recom
-
mended stylus pressure.
Note: The recommended stylus pressure of the optional cartridge that may have been included with
your unit is 2 grams. For all other cartridge systems please refer to the manufactures specification
included with the cartridge.
Anti-Skate:
The anti-skate adjustment prevents the TONEARM ASSEMBLY (9) from skipping across the record
from the centrifugal force that is caused spinning rotation of the PLATTER (20). The ANTI-SKATING
(15) control knob should be set to the same value as the stylus pressure. For example if your
COUNTERWEIGHT (16) is set to 2.5 grams the ANTI-SKATE (15) value should also be set to 2.5.
SET-UP
©American Audio® - www.americanaudio.us - TTD-2400™ Instruction Manual Page 10