Filter
Top Products
American Audio® • PRO-DJ2FX™ INSTRUCTION MANUAL • PAGE 24
BUILT-IN EFFECTS: The PRO-DJ2FX™ comes with two built in effects. Only one effect may be
used at any given time. The Built-in effects include Skid and Coast. When either effect is activated a
corresponding icon will display in the LCD. For example when the SKID EFFECT (1) is activated a 1
(35) icon will display in the LCD (13). You can choose to use the effects with their default setting or
you may choose activate the SKID/COAST/ADJUST (11) function to increase the effect parameters
(see below). Each effect has two sets of parameters. All parameters will be reset to there default
values when power is shut off.
1. SKID - This button activates the SKID effect. This effect
simulates the sudden platter stop of a turntable. Almost like
pressing the stop button on a turntable.
SKID EFFECT:
The Skid effect simulates the sudden platter stop of a
turntable, like pressing the stop button on a turntable. When the SKID
effect is selected the "SKID" icon displays in the LCD (13).
ADVANCED OPERATIONS
Figure 36
3. SKID/COAST/ADJUST - This button allow you to change the Skid
and Coast values. With the SKID/COAST/ADJUST button selected
(on) the SKID value is one second and the COAST value is five
seconds. With the SKID/COAST/ADJUST deselected (off) the SKID
value is a 1/2 second and the COAST value is three seconds. A yellow
LED will indicated on and off functions.
2. COAST - This button activates the COAST effect. This effect
will simulates turning the power off on a turntable, a turntable
platter spinning until it slowly loses momentum and stops.
COAST EFFECT:
The COAST effect simulates a turntable slowly
revving up to it's proper speed, or slowly winding down to a stop, like
tuning the power off when a turntable is running. When the COAST
effect is selected the "COAST" icon displays in the LCD (13).
Figure 37
Figure 37