Filter
Top Products
©American Audio® - www.americanaudio.us - M822FX Instruction Manual Page 17
M822FX HOME STUDIO SET-UP
SETUP PROCEDURE:
1. Before connecting to microphones and instruments, be sure that all devices are turned off. Also
be sure that all of the mixer’s channel fader and master control faders are set all the way down.
2. For each connection, connect one end of the cable to the relevant microphone or instrument and
connect the other end to the appropriate input jack on the mixer.
NOTE: Where an input channel provides both a MIC INPUT jack and a LINE INPUT jack, you
may use either one of these jack but you may not use both at the same time. Please
connect to only one of these jacks on each channel.
3. To avoid causing damage to speaker, power up the devices in the following order: Peripheral
devices mixer power amps (or powered speakers).
NOTE: When shutting the system down, turn off the power in the opposite order: Power amps
(powered speakers) mixer Peripheral devices.
MONOMONOMONO
AUX
RETURN
TAPE IN REC OUT
ALT 3/4 OUTPUTFOOT SWITCH
MAIN OUTPUT
CONTROL ROOM
LINE
INSERT
1
MIC
OUTIN
LINE
INSERT
2
MIC
LINE
INSERT
3
MIC
LINE
INSERT
4
MIC
LINE 5
LINE 6
5/6
MIC
LINE 7
LINE 8
7/8
LINE 9
LINE 10
LINE 9
LINE 10
LINE 11
LINE 12
9/10
MIC
LINE 11
LINE 12
11/12
AUX
EFX
HEADPHONE
Microphone
Guitar
Powered Monitor
Speakers
Foot Switch
Sound Source(CD,MD,DAT,
Cassette,Video etc.)
Master Recorder(MD,DAT.)
Synthesizer
MTR
Rhythm Machine
Effector
Effector
COMPACTDISCPLAYER
PROGRAM
EJECT
POWER
REPEAT SKIP FWD
MIN MAX
PLAY/PAUSE
LEVELSTOP
REW
COMPACTDISCPLAYER
PROGRAM
EJECT
POWER
REPEAT SKIP FWD
MIN MAX
PLAY/PAUSE
LEVELSTOP
REW