Filter
Top Products
& 59). When the TOTAL REMAIN indicator is dis-
played in the LCD (14), the time defined will refer
to a disc's total remaining time. The time mode is
changed by tapping on TIME BUTTON (5).
67. SINGLE INDICATOR - This indicates the unit
is in single play mode, the unit will play a single
and return to CUE mode. If the single indicator is
not displayed the unit is in continuous mode. In
continuous mode the drive will play through all
the tracks on the disc. Once all the tracks have
ended the unit will return to cue mode.
68
. 1 INDICATOR - This indicator is in direct
reference to the REPEAT (69) indicator and repeat
program play function (see programming on page
23). When the repeat function is first activated,
the unit enters a repeat track mode. This mode
will repeat a single track over and over until the
repeat function is disengaged. The single track
repeat function is indicated by the REPEAT (69)
and 1 icons in the LCD (14).
69
. REPEAT INDICATOR - This indicator is in
direct reference to the repeat program play func-
tion (see programming on page 23). When the
repeat function is activated the "REPEAT" (69)
icon will display in the LCD (14). When the repeat
function is first activated, the unit enters a repeat
track mode. This function is indicated by the
REPEAT (69) and 1 (68) icons in the LCD (14).
58, & 59
). As with the TIME METER (57, 58, & 59),
this bar is also dependent on the selected time
function TOTAL REMAIN (66), REMAIN (62) OR
ELAPSE (56
). This bar will begin to flash when 15
seconds of a track remain and will begin to rap
-
idly flash when three seconds of a track remain.
The flashing bar is a great visual reminder a track
is about to end. The flashing bar will function
regardless of which time mode the unit is in.
62. REMAIN INDICATOR -
This indicator is in
direct reference
to the TIME METER (57, 58, &
59
). When the REMAIN indicator is displayed
in the LCD (14), the time defined will refer to a
single track's remaining time. The time mode is
changed by tapping on TIME BUTTON (5).
63
. DATA/FX INDICATOR - This icon will dis-
play when the DATA function is engaged. When
the DATA function is engaged the buttons along
the top of the LCD (14) will function as they are
detailed. When this icon is off the buttons along
the top of the LCD (14) will function as direct track
access buttons.
64. RELOOP INDICATOR -
This icon will display
when a LOOP is engaged or is set and ready to
be engaged.
65. LOOP - This icon flashes when a loop is
engaged or displays when a loop is not engaged
but is set and ready to be engaged.
66. TOTAL REMAIN INDICATOR - This indicator
is in direct reference
to the TIME METER (57, 58,
LIQUID CRYSTAL DISPLAY (CONT)
©American Audio® - www.americanaudio.us - DCD-PRO610™ Instruction Manual Page 15