Filter
Top Products
ality. For more information on the Scratch Box
refer to the Scratch Box manual.
41. DRIVE 2 REMOTE JACK
- Connect the sup-
plied 8 pin din cable from this jack to the remote
control's channel 2 remote connector. This will
allow you to control the player functions with the
remote unit.
42. DRIVE 2 DIGITAL OUT - This jack sends a
digital stereo out signal. Use this connection to
create near perfect copies of your disc to a Mini
disc, CD-R, or any other recording device with a
digital input.
43. DRIVE 2 AUDIO OUT R & L - These jacks
send a left and right analog mono output signal.
Use these jacks to send standard audio to a mixer
or receiver. The red colored jack represents the
right channel output and white jack represents
the left channels output.
44. VOLTAGE SELECTOR - Because power
supplies vary from location to location a voltage
selector switch has been incorporated in the unit's
design. This switch can select a voltage input of
120v or 220v to accommodate the two major
power source. Always be sure to disconnect the
power plug before changing the voltage.
45. POWER CONNECTOR -
This is the main
GENERAL FUNCTIONS AND CONTROLS - PLAYER UNIT
©American Audio® - www.americanaudio.us - DCD-PRO610™ Instruction Manual Page 13
power connection. Only use the supplied polar-
ized power cord. Use of any other power may
result in sever damage to the unit. Be sure the
local power matches the unit’s required power.
46. OPTIONAL SCRATCH BOX INPUT (Drive
1)- This jack is used to receive the digital Scratch
Box signal. Use the included stereo mini plugs to
connect the Scratch Box to the to this jack. Be
sure to use a dual stereo jack for proper function
-
ality. For more information on the Scratch Box
refer to the Scratch Box manual.
47. DRIVE 1 REMOTE JACK
- Connect the sup-
plied 8 pin din cable from this jack to the remote
control's channel 1 remote connector. This will
allow you to control the player functions with the
remote unit.
48. DRIVE 1 DIGITAL OUT - This jack sends a
digital stereo out signal. Use this connection to
create near perfect copies of your disc to a Mini
disc, CD-R, or any other recording device with a
digital input.
49. DRIVE 1 AUDIO OUT R & L - These jacks
send a left and right analog mono output signal.
Use these jacks to send standard audio to a mixer
or receiver. The red colored jack represents the
right channel output and white jack represents
the left channels output.