Filter
Top Products
applied will be displayed in the LCD (14). Use this
slider to match the BPM’s of this unit to that of
another music source. By changing the pitch of
one disc with respect to the other in this way, the
beats can be matched.
24. BPM BUTTON - This changes toggles
between the PITCH function and BPM function
indicators in the LCD. When the BPM function
is engaged, the COUNTER (25) button may be
used to manually display a tracks BPM's in the
LCD (14). When the BPM function is disengage,
a tracks pitch value will be displayed in the LCD
(14).
25. COUNTER BUTTON - When the unit is BPM
mode, tapping this button to tracks beat will
determine a tracks BPM's. The BPM value will
be displayed in the LCD.
26. IN REAL-TIME CUE (SEAMLESS LOOP IN
BUTTON) - “CUE ON THE FLY” - This button
allows you to set a CUE POINT (see CUE POINT
page 18) without music interruption (“on the fly”).
This button also sets the starting point of a loop
(see SEAMLESS LOOP on page 21).
27. CUE - Pressing the CUE button during play
-
back immediately pauses playback and returns
the track to the last set cue point (see setting a
CUE POINT, page 20). The red CUE LED will glow
when the unit is in cue mode The LED will also
flash every time a new CUE POINT is set. The
CUE button can be held down to momentarily
play the CD. When you release the CUE button it
instantly returns to the last set CUE POINT. You
can also tap the CUE button to create a BOP
EFFECT (for definition of BOP EFFECT, see page
24).
28. OUT/EXIT - This button serves two functions;
1) This button is used to set the ending point of
a loop. 2) During normal loop playback, a loop is
exited by pressing the OUT/EXIT BUTTON .
29. PLAY/PAUSE BUTTON - Each press of the
PLAY/PAUSE BUTTON causes the operation to
change from play to pause or from pause to play.
While in play mode the green play LED will glow,
and while in pause mode the green play LED will
flash.
30. RELOOP/BOP BUTTON - This button con
-
trols two functions;
A. RELOOP; If a Loop has been made (see
setting a Seamless Loop on page 21), but
the unit is not actively in Loop mode (a loop
is not playing), pressing the RELOOP/BOP
BUTTON will instantly reactivate Loop mode.
To exit the Loop , press the OUT/EXIT BUT-
TON (28). LOOP (65) and RELOOP (64) will
display in the LCD (14) when the
Reloop
function is available.
B. BOP; This button is used to activate the BOP
Effect. A Bop Effect is a stutter, creating a
sound similar to a CD skipping. This func-
tion will instantly play the last set cue point
during playback without music interruption.
The Bop Effect can be created in 2 ways.
See creating a BOP on page 24.
B. REMOTE CONTROL - REAR (FIGURE 4)
31. CHANNEL 2 CONTROLLER JACK - Connect
the supplied mini-plug from the CUE jack on the
rear of your CD unit to the CONTROL out jack of
a compatible American Audio
® or American DJ®
mixer. This will enable the CD "Q-Start" function.
This feature is only available on American Audio
®
or American DJ
® “Q” series mixers.
32. CHANNEL 2 REMOTE JACK
- Connect the
supplied 8 pin din cable from this jack to the
player's channel 2 remote connector. This will
allow you to control the player functions.
33. CHANNEL 1 CONTROLLER JACK -
Connect
the supplied mini-plug from the CUE jack on the
rear of your CD unit to the CONTROL out jack of
a compatible American Audio
® or American DJ®
mixer. This will enable the CD "Q-Start" function.
This feature is only available on American Audio
®
or American DJ
® “Q” series mixers.
34. CHANNEL 1 REMOTE JACK
- Connect the
supplied 8 pin din cable from this jack to the
player's channel 1 remote connector. This will
allow you to control player 1's functions.
GENERAL FUNCTIONS AND CONTROLS - REMOTE UNIT (CONT)
©American Audio® - www.americanaudio.us - DCD-PRO610™ Instruction Manual Page 11