Filter
Top Products
MULTI-TASKER
11
11
y = Absolute audio level (y = 1 to 15)
k = group number (k = # from 1-9)
i = Unit ID number (i = 0 to 9)
Example:
If card 1, 2, and 3 are grouped as group 5 of
unit 1, send the [VOL2A32G5U1] command to
set maximum volume for card 1, 2, and 3
simultaneously.
7. [VOLOAyCnUi]
This command sets absolute individual volume
level for single card. Command Format:
[VOLOAyCnUi]
y = Absolute audio level (y = 1 to 32)
n = Card ID number (n = slot # from 1 to 19)
i = Unit ID number (i = 0 to 9)
Example:
If the status of audio card 2 of unit zero is as
follows:
VOLIN1:16
VOLIN2:21
VOLIN3:32
VOLOUT:17
BASS:8
TREBLE:14
LOUDNESS:ON
Send commands [VOLOA8CnUi]. After
executing this command, send [C2] to get the
new status of card 2:
VOLIN1:2
VOLIN2:12
VOLIN3:18
VOLOUT:8
BASS:8
TREBLE:14
LOUDNESS:ON
[VOLOmAYGkUi]
This command sets absolute individual volume
level for a group of cards. Command Format:
[VOLOAyGkUi]
y = Absolute audio level (y = 1 to 15)
k = group number (k = # from 1-9)
i = Unit ID number (i = 0 to 9)
Example:
If card 1, 2, and 3 are grouped as group 5 of
unit 1, send the [VOLOA32G5U1] command to
set maximum volume for card 1, 2, and 3
simultaneously.
8. [SELBCnUi]
This command sets path to adjust the bass level
for single card. Command Format: [SELBCnUi]
[–] [–] [–] [–] or [+] [+] [+] [+]
n = Card ID number (n = slot # from 1 to 19)
i = Unit ID number (i = 0 to 9)
+ = increases volume. (maximum of 15 levels
for bass).
– = decreases volume. (maximum of 15 levels
for bass).
Example:
If the status of audio card 5 of unit zero is as
follows:
VOLIN1:2
VOLIN2:12
VOLIN3:18
VOLOUT:8
BASS:8
TREBLE:14
LOUDNESS:ON
Send commands [SELBC5] [+] [+] [+] [+] [+].
After executing that command, send [C5] to get
the new status of card 5:
VOLIN1:2
VOLIN2:12
VOLIN3:18
VOLOUT:8
BASS:13
TREBLE:14
LOUDNESS:ON
[SELBGkUi]
This command sets path to adjust the bass level
for a group of cards. Command Format:
[SELBGkUi] [–] [–] [–] [–] or [+] [+] [+] [+]
k = group number (k = # from 1-9)
i = Unit ID number (i = 0 to 9)
+ = increases volume. (maximum of 15 levels
for bass).
– = decreases volume. (maximum of 15 levels
for bass).
Example: