Filter
Top Products
Welcome to the extraordinary world of Altec Lansing high-fidelity
sound. The Altec Lansing 220 speaker system consists of two amplified
speakers especially enhanced for PC Audio experience.
With 10 watts of total system power, it delivers quality performance
from MP3 players, CD players, cassette players, DVD players, gaming
consoles, and other audio/video devices.
Box Contents
• 2 Satellites
• Manual
• QCC
Placing Speakers
SATELLITE SPEAKERS
Arrange the satellites to suit your listening tastes—from directly next
to the monitor to as far apart as the speaker cords allow.
Note: The satellite speakers are magnetically shielded and can be
placed close to video displays such as TVs and computer monitors
without distorting the image.
Making Connections
WARNING:
Do not insert the speaker system’s power plug into an AC outlet until
all connections are made. Also, turn off audio sources (i.e., your PC,
MP3 player, console game, etc.) before connecting their outputs to the
220’s inputs.
To ensure first-time operation as expected, please carefully follow the
connection sequences described below in the order indicated.
SATELLITE SPEAKERS
The satellite speakers must be connected to the audio device. The only
connection that needs to be made is the lime green 3.5mm stereo
audio cable—which is connected to the right satellite—into the audio
output on your audio device. After this connection is made, insert the
power plug located on the rear of the left satellite into an AC outlet.
You can now use your speakers.
INPUTS
Various connection schemes between your audio source device and the
220 are available. Determine if you’ll be setting up the speaker system
for PC audio/PC gaming, DVD playback, console gaming or with
portable audio sources (such as MP3 or portable CD players), then skip
to the section with that title.
PC AUDIO/PC GAMING/DVD PLAYBACK
All PC sound cards have audio outputs. Typically, the outputs will
be marked as “front output” and “rear output.” In some cases,
slightly different terminology may be used. The sound card’s
documentation should help you determine which outputs to use
with your speaker system.
1. Connect the lime green 3.5 mm stereo cable, which is connected to
the right satellite, into your sound card’s input labeled “FRONT,”
which is also lime green in color.
CONSOLE GAMING
(Requires the use of the AAC1 Y-adapter, which is not included. This
adapter can be purchased at www.alteclansing.com.)
Most console game systems feature dual-RCA outputs. Popular console
systems manufacturers include Sony™, Microsoft™, Nintendo™ and
Sega™. To connect your speakers, follow the steps below:
1. Make sure the power to your console gaming system is turned off.
2. The AAC1 Y-adapter has a lime green 3.5 mm stereo jack on one end
and two RCA jacks on the other—one red and one white.
3. Locate the red and white RCA plugs on the end of the cable connected
to the back of your console gaming system. Connect them to the
matching red and white RCA jacks on the AAC1 Y-adapter cable.
4. Locate the lime green 3.5 mm stereo plug, which is connected to the
right satellite.
5. Insert the lime green plug into the lime green jack on the
AAC1 Y-adapter cable.
PORTABLE AUDIO DEVICES (MP3, PORTABLE CD PLAYERS, ETC.)
1. Locate the lime green 3.5 mm stereo plug, which is connected to the
right satellite.
2. Insert the lime green plug into the headphone jack on your portable
audio device.
Headphones
To use headphones with the system, plug them into the labeled
jack on the front of the right satellite. When headphones are
connected, both satellites are muted.
Powering On
After all connections are made, plug the power cord located on the
rear of the left satellite, into an AC wall socket. The speaker system is
now ready to operate.
1. Turn on the audio source.
2. Turn on the Altec Lansing 220 speaker system by pushing the power
button located on the front of the right satellite . A green LED will
light next to the button when the power is on.
Note: To avoid hearing a popping sound when you turn on your Altec
Lansing speaker system, always turn on your audio source first.
MASTER VOLUME
The knob on the front of the right satellite is the master volume
control for the speaker system. Turn the knob clockwise to increase the
volume and counter-clockwise to decrease the volume.
3
2-Piece Amplified
Speaker System
WELCOME
220
2
The lightning flash with arrowhead, within an equila-
teral triangle, is intended to alert the user to the pres-
ence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
Caution: To prevent the risk of electric shock, do not
remove cover (or back). No user- serviceable parts
inside. Refer servicing to qualified service personnel.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
SAFETY INSTRUCTIONS
Read Instructions — All the safety and operating instructions
should be read before the appliance is operated.
Retain Instructions — The operating instructions should be
retained for future reference.
Heed Warning — All warnings on the appliance and in the
operating instructions should be adhered to.
Follow Instructions — All operating and use instructions
should be followed.
Water and Moisture — The appliance should not be used near
water – for example, near a bathtub, washbowl, kitchen sink, laundry
tub, in a wet basement, or near a swimming pool, etc.
Outdoor Use — Warning: To reduce the risk of fire or electric
shock, do not expose this appliance to rain or moisture.
Location — The appliance should be installed in a stable location.
Ventilation — The appliance should be situated so that its
location or position does not interfere with its proper ventilation. For
example, the appliance should not be situated on a bed, sofa, rug, or
similar surface that may block the ventilation openings; or placed in a
built-in installation, such as a closed bookcase or cabinet that may
impede the flow of air through the ventilation openings.
Heat — The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances (including
amplifiers) that produce heat.
Power Sources — The appliance should be connected to a power
supply only of the type described in the operating instructions or as
marked on the appliance.
Power-Cord Protection — Power-supply cords should be
routed so that they are not likely to be walked on or pinched by items
placed upon or against them. Pay particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the appliance.
Grounding or Polarization — The precautions that should
be taken so that the grounding or polarization means of an appliance
is not defeated.
Cleaning — The appliance should be cleaned only with a polishing
cloth or a soft dry cloth. Never clean with furniture wax, benzene,
insecticides or other volatile liquids since they may corrode the cabinet.
Non-Use Periods — The power cord of the appliance should be
unplugged from the outlet when left unused for a long period of time.
Lightning Storms — Unplug the appliance during lightning
storms.
Object and Liquid Entry — Care should be taken so that
objects do not fall and liquids are not spilled into the enclosure
through openings.
Accessories — Only use attachments/accessories specified by the
mfg.
Damage Requiring Service — The appliance should be
serviced by qualified service personnel when:
• The power-supply cord or the plug has been damaged.
• Objects have fallen, or liquid has been spilled into the appliance.
• The appliance has been exposed to rain.
• The appliance does not appear to operate normally or exhibits
a marked change in performance.
• The appliance has been dropped or the enclosure damaged.
Servicing — The user should not attempt to service the appliance.
Servicing should be referred to qualified service personnel or returned
to the dealer or call the Altec Lansing service line for assistance.
One Year Limited Warranty
Altec Lansing Technologies, Inc. warrants to the end user that all of its
computer speaker systems are free from defects in material and
workmanship in the course of normal and reasonable use for a term of
one year from the date of purchase.
This warranty is the exclusive and only warranty in effect relative to
Altec Lansing computer speaker systems and any other warranties,
either expressed or implied, are invalid. Neither Altec Lansing
Technologies, Inc. nor any authorized Altec Lansing Technologies, Inc.
reseller is responsible for any incidental damages incurred in the use of
the speakers. (This limitation of incidental or consequential damage is
not applicable where prohibited.)
Altec Lansing Technologies, Inc. obligation under this warranty does
not apply to any defect, malfunction or failure as a result of misuse,
abuse, improper installation, use with faulty or improper equipment or
the use of the computer speaker systems with any equipment for
which they were not intended.
The terms of this warranty apply only to computer speaker systems
when such speakers are returned to the respective authorized Altec
Lansing Technologies, Inc. reseller where they were purchased.
Under the terms of this warranty, the original consumer purchaser has
certain legal rights and may have other rights, which vary worldwide.
CAUTION
To prevent electric shock do not use this (polarized) plug with an
extension cord, receptacle or other outlet unless the blades can
be fully inserted to prevent blade exposure.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Connecting the Power Cord (AC Wall Socket)
Long slot is neutral
(ground) side.
Insert the wide blade
into the ground side slot.