Filter
Top Products
27-EN
Data Downloading
1
Insert the CD-R disc containing the data.
If the source is not the CD mode, press
SOURCE/POWER to change to CD mode.
2
Press MENU.
3
Select the Download mode by sliding your finger
on the GlideTouch bar to the left or right. Press
the GlideTouch bar under the Download mode.
4
Select Download (YES) by pressing the
GlideTouch bar under Download (YES).
Data search of the disc starts and the first file name is
displayed.
• If you want to cancel the data search, press the GlideTouch bar
under CANCEL (NO).
• If a file is not found by a data search, “No File” is indicated.
• The “No File” display will automatically disappear if no operation
is performed for 5 seconds.
5
Select the file to download by sliding your finger
on the GlideTouch bar to the left or right. Press
the GlideTouch bar under the desired file.
Data downloading starts.
6
When data download is finished successfully, the
confirmation screen is displayed (for the CDA-9853
model, each confirmation screen of download data
is sequentially displayed), and download finishes.
Successfully downloaded items are indicated as checked
boxes on the confirmation screen.
PARAMETRIC EQ or Graphic EQ data
*
The data is memorized in Preset 6 of Parametric EQ mode or
Graphic EQ mode. The memorized data settings in Preset 6
(Parametric EQ mode or Graphic EQ mode) are automatically
applied.
X-OVER (Crossover) data
The data is memorized in Preset 6 of X-OVER mode. The
memorized data settings in Preset 6 (X-OVER mode) are
automatically applied.
You cannot download the data if the setting of the 2WAY/3WAY
switch is not suitable for the data.
TIME CORRECTION data
The data is memorized in Preset 6 of the Time correction
mode. The memorized data settings in Preset 6 (Time
Correction mode) are automatically applied.
* If the downloaded parametric EQ or graphic EQ differs from
the current EQ mode, Preset 6 setting will not change
automatically. Change the EQ mode and recall Preset 6.
* If data is downloaded while setting DEFEAT to ON, Preset 6
setting will not change automatically. Recall Preset 6 in the EQ
mode.
7
Press and hold MENU for at least 2 seconds to
return to normal mode.
• When you download the data again, the data is overwritten in
Preset 6.
•IfMENU is pressed while adjusting or setting the itmes in the
MENU mode, the unit will return to the previous selection secreen.
• By pressing the GlideTouch bar under RETURN in the MENU
mode, the unit will return to the normal mode.
SETUP
You can flexibly customize the unit to suit your own preferences and
usage. Choose the SETUP menu from General Setting, Tuner Setting,
etc., to select your desired setting.
The common operation for SETUP is step 1 to 4 as
follows. See down below for further information
about each SETUP menu.
1
Press MENU.
2
Select SETUP by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under SETUP.
The main SETUP menu is displayed.
3
Select the desired item by sliding your finger on
the GlideTouch bar to the left or right. Press the
GlideTouch bar under your selection.
GENERAL ↔ TUNER ↔ AUDIO ↔ DISPLAY ↔ DEMO
The SETUP menu of the selected item is displayed.
4
Select the desired item by sliding your finger on
the GlideTouch bar to the left or right. Press the
GlideTouch bar under your selection.
CDA-9855:
GENERAL
CLOCK MODE*
1
↔ CLOCK ADJUST ↔ PLAY MODE ↔ BEEP
↔ INT MUTE ↔ INT AUDIO ↔ AUX IN ↔ (AUX NAME)*
2
↔
D-AUX ↔ POWER IC ↔ STEERING ↔ CLOCK MODE*
1
TUNER
TUNER MODE ↔ TUNER AREA*
3
↔ XM ADF*
4
↔
TUNER MODE
AUDIO
SUBWOOFER ↔ SUBW CH ↔ SUBW SYSTEM*
5
↔
EQ MODE*
6
↔ TW SETUP*
7
↔ A.PROC TYPE ↔
SUBWOOFER
DISPLAY
DIMMER ↔ DIMMER LEVEL ↔ SCROLL TYPE ↔ TEXT
SCROLL ↔ FONT SELECT ↔ A-LINK TEMP*
8
↔ BGV
SELECT ↔ OPENING MSG ↔ CALENDAR ↔ T.CORR*
9
↔ DIMMER
DEMO
DEMO
BAND
SOURCE/
POWER
g
f GlideTouch bar
Rotary encoder
MENU