Alpine CDA-105 CD Player User Manual


 
9-EN
Playback
1
Press (OPEN).
The front panel will open.
2
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
Close the front panel manually and the “ ” indicator
lights up.
When a disc is already inserted, press SOURCE/ to
switch to the DISC mode.
TUNER XM RADIO/SIRIUS*
1
DISC USB AUDIO*
2
/
USB iPod*
3
BT AUDIO*
4
/AUX+*
5
CHANGER*
6
TUNER
*
1
Only when XM Radio or SIRIUS Radio is connected.
*
2
Displayed only when no iPhone/iPod is connected.
*
3
Displayed only when the iPhone/iPod is connected.
*
4
Displayed only when BLUETOOTH IN is set to ADAPTE, refer to
“Setting the Bluetooth Connection” (page 17).
*
5
Displayed only when the AUX+ SETUP is set to ON, refer to “Setting
the AUX+ SETUP Mode” (page 18).
*
6
Only when the CD changer is connected.
3
While playing back MP3/WMA/AAC, press or to
select the desired folder.
Pressing and holding or will change folders
continuously.
4
Press or to select the desired track (file).
Returning to the beginning of the current track (file):
Press .
Fast backward:
Press and hold .
Advancing to the beginning of the next track (file):
Press .
Fast forward:
Press and hold .
5
To pause playback, press / .
Pressing / again will resume playback.
6
After pressing (OPEN) to open the front panel,
press to eject the disc.
Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
If the CD does not eject, press and hold for at least 2 seconds.
The “ ” indicator lights up when a disc is inserted.
Three-inch (8 cm) CDs cannot be used.
The CD-player can play discs containing audio data, MP3 data,
WMA data and AAC data.
“MP3” is displayed during MP3 playback.
“WMA” is displayed during WMA playback.
“AAC” is displayed during AAC playback.
WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from
iTunes Store and files that are copy-protected (copyright protection)
cannot be played back on this unit.
The track display for MP3/WMA/AAC data playback is the file
numbers recorded on the disc.
The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
MP3/WMA/AAC Play Display
The folder number and file number will be displayed as
described below.
Press VIEW to switch the display. See “Displaying the Text”
(page 15) for information about display switching.
Repeat Play
Press
4
to play back repeatedly the track being played.
The track (file) will be played repeatedly.
Press 4 again and select off to deactivate repeat play.
CD mode :
*
1
When a CD changer is connected.
If is set to ON during M.I.X. play in CD changer mode, M.I.X.
will apply to the current disc only.
CD/MP3/WMA/AAC
4 5
(OPEN)
F/SETUP
SOURCE/
/
Rotary encoder
/ENT
/ESC
VIEW
101 103
Folder number
display
File number
display
: Only a track is repeatedly played back.
: A disc is repeatedly played back.