Filter
Top Products
- Page 5 -
Pressing the PLAY button is also the same as punching out, except that the part will immediately start
playing from the beginning. The rewind and fast forward buttons will also punch out. Pressing
STOP/CONTINUE also punches out, but stops the part from playing as well.
When recording for the first time on an empty part, the track will continue recording until
STOP/CONTINUE, FAST-FORWARD, REWIND, or PLAY is pressed. When one is pressed, this determines
the length of the part, rounded to the nearest beat. When recording on any other track, the part will
automatically stop when the end of the part (as determined by the first record track) is reached. If LOOP
is on, the RECORD LED will turn off ("punch out"), and the part will begin playing from the start. It it
possible to set the length before recording the first track, or to change the length after recording the first
track (see LENGTH).
While holding the RECORD button, pressing and holding the LENGTH button will show on the display the
percentage of memory still available to recording.