Filter
Top Products
- Page 32 -
For sending data to the MIDI OUT port, pressing RECORD from the SEND ALL PARTS & SONGS OUT
MIDI page results in the display showing:
Again, the RECORD and TAPE buttons can be released, and the display will continue until the operation is
complete, with the currently loading or verifying part or song number being shown in the display. When
loading one part or song, the display will continue to show the selected part or song number in the upper
display. When sending out MIDI data, the display shown above will remain until the data has been sent
out. After completion of the tape functions, the display will return to its previous state (select part or
select song). If an error is encountered while loading from tape, the display will show ERROR as soon as
it occurs, for example:
The tape will attempt to continue to load, but it is possible that the data will be corrupted and therefore
unusable.
During any of the tape operations (but not the send MIDI function), the STOP/CONTINUE button can be
used to abort the operation. The display will show:
When loading in all parts and songs, aborting the tape may leave unusable data in memory. When
loading one part or song, aborting after the selected part or song has passed will not cause any
problems.