Filter
Top Products
17
En
TAPE PLAYBACK
Playback
Use only type I (normal) tapes.
1
Press PUSH EJECTz to open the cassette holder.
2
Insert the tape.
Insert with the exposed side down, and press PUSH
EJECTz to close the cassette holder.
3
Press dTAPE (REC MUTING) (dTAPE) to
start play.
Reading the indicators
l: The front side is being played (forward).
j: The back side is being played (reverse).
To select a reverse mode
Hold down SHIFT and press REV MODE on the remote
repeatedly.
The mode changes as follows;
"p" : Plays one side only
"[" : Plays from the front side to the back sides once.
"]" : Plays both sides repeatedly
To stop playback
Press s.
To change the playback side
Press dTAPE (REC MUTING) (dTAPE) in playback
mode.
To rewind or fast forward
Press f or g.
To reset the tape counter
Press s in stop mode, and the tape counter in the display is
reset to "0000".
Opening and closing the cassette holder will also reset the
tape counter.
To eject the tape
Press PUSH EJECTz after the deck stops completely.
dTAPE
(REC MUTING)
f,g
SHIFT
dTAPE
f,g
s
PUSH
EJECTz
REV MOD
E
s
Notes on cassettes
•Use of a tape longer than 90 minutes is not recommended
since they are extremely thin and easily damaged. If you
should use it, do not change the tape operations such as
play and stop frequently.
•Take up any slack in the tape with a pencil or similar tool
before use. Slack tape may get entangled in the deck
mechanism and become damaged.