Filter
Top Products
14
En
TUNER OPERATIONS
Manual tuning
1
Press TUNER/BAND repeatedly to select a band.
The unit switches to the tuner from any other function
and alternates between FM and AM.
2
Press f or g repeatedly to tune in a station.
"TUNE" is displayed when a station is tuned in.
"1" is displayed for FM stereo reception.
To search for a station automatically (Auto search)
Hold down f or g.
The unit searches for a station and stops at reception.
To stop the search manually, press f or g.
•Auto search may not stop at stations with weak signals.
Preset tuning
Preset your favourite stations by either of the following ways
("Manual presetting" or "Automatic presetting") and tune them
in directly by using preset numbers.
Manual presetting
1
Tune in the desired station.
2
Press ENTER on the remote to store the station.
The preset number, beginning from "1" appears in the
display.
3
Repeat steps 1 and 2 to preset other stations.
The next station will not be stored if a total of 32 preset
stations have already been stored. ("Full" is displayed.)
•If power is interrupted for more than approximately 12 hours,
all settings stored in memory after purchase need to be reset.
Automatic presetting
Scans the receivable frequency range and stores tuned stations
automatically with the preset number.
1
Press TUNER/BAND.
2
Hold down ECO/RDS for 2 seconds until
"AUTO PRESET" scrolls in the display.
3
Press ECO/RDS on the unti or ENTER on the
remote.
If ECO/RDS or ENTER is not pressed within 6 seconds,
automatic presetting is not activated.
The tuning indicator is displayed and scanning begins
with the FM band.
The frequency and the preset number (beginning from 1)
will be displayed when a tuned station is stored.
The display will return to the first stored station when
scanning is finished.
•The unit scans the AM bands if preset numbers are still
available.
•Automatic presetting clears all the previously stored preset
stations.
•If identical RDS stations with alternative frequencies are
detected, only the station with the stronger signal is stored.
SHIFT
TUNER/BAND
TUNER/
BAND
ECO/RDS
TUNER
MODE
ALBUM/
PRESET
N,M,
f,g,
ENTER
s
CLEAR
1–10/0, >10
f,g