Filter
Top Products
m
CONNECTING OPTIONAL
EQUIPMENT
‘o
@
m
– CD DIGITAL OU1
(OPTICAL)
- VIDEO/AUX
Refer to the operating instructions of the connected equipment
for details.
. The con netting cords are not supplied. Obtain the necessary
connecting cords.
● Consult your local Aiwa dealer for optional equipment.
VIDEO/AUX JACKS
This unit can input analog sound signals through these jacks.
Use a cable with RCA phono plugs to connect audio equipment
(turntables, LD players, VCRs, TV, etc.).
Connect the red plug to the R jack, and the white plug to the L
jack.
\
When connecting a turntable
Use an Aiwa turntable equipped with a built-in equalizer amplifier.
CD DIGITAL OUT (OPTICAL) JACK
This unit can output CD digital sound signals through this jack.
Use an optical cable to connect digital audio equipment (digital
amplifier, DAT deck, MD recorder, etc.).
Remove the dust cap @ from the CD DIGITAL OUT (OPTICAL)
jack. Then, connect an optical cable plug@ to the CD DIGITAL
OUT (OPTICAL) jack.
LISTENING TO EXTERNAL
SOURCES
POWER
,1.,,_ __ ,,, ,,._=_ ~
-1
To play equipment connected to the VIDEO/AUX jacks, proceed
as follows.
1 Press the VIDEO/AUX button.
VIDEO appears on the display.
2 Play the connected equipment.
To change a source name in the display
When the VIDEO/AUX button is pressed, VIDEO is displayed
initially. It can be changed to AUX or TV.
With the Dower on, press the POWER button while messina the
VIDEO/AUX butte;:
Repeat the procedure to select one of the names.
❑
When th,e CD DIGITAL OUT (OPTICAL) jack is not being
used
Attach the supplied dust cap.
ENGLISH 14