Aiwa NSX-AJ503 Stereo System User Manual


 
5
En
Main unit: rear
1 AM LOOP, FM 75 terminals
Plug in the supplied AM and FM antennas here.
2 VIDEO/AUX jacks
Accepts analog sound signals from external equipment.
Connect using an optional connecting cable with RCA
phono plugs (red plug to R jack, white plug to L jack).
Refer also to the operating instructions of your equipment.
To switch function to external input, press VIDEO/AUX
to select the VIDEO (AUX/TV) function.
Tip:
To change the displayed name for this function, turn the
unit on, then hold down VIDEO/AUX and press POWER.
Repeat the procedure to select one of "VIDEO", "AUX"
or "TV".
3 SURROUND SPEAKERS3 jacks (only
for NSX-AJ503)
Connect the speaker cord of the supplied surround
speakers here.
4 SPEAKERS3 terminals
Connect the speaker cord of the supplied front speakers
here.
5 AC power cord
Remote control
Detach the battery compartment lid at the rear of the remote
control and insert two R6 (size AA) batteries with correct
polarity.
Replace the batteries with new ones when the operational
distance between the remote control and main unit becomes
shorter.
Remove the batteries if the unit is not going to be used for
an extended period of time.
The remote control may not operate if it is used under intense
sunlight, etc., or if its line of sight is obstructed.
"4" and "5" of DISC DIRECT PLAY on the remote control
cannot be used on this system.
PARTS AND CONTROLS
*This illustration is only for NSX-AJ503.
There are no SURROUND SPEAKERS jacks on CX-NAJ500
for NSX-AJ500.
01NSX-AJ500/AJ503(U)/Eng 12/22/00, 3:51 PM5