Filter
Top Products
4
En
PREPARATIONS
3
Connect the supplied antennas.
Connect the FM antenna to the FM 75 Ω terminals and
the AM antenna to the AM LOOP terminals.
FM antenna
AM antenna
4
Connect the AC power cord to an AC outlet.
When the AC power cord is connected to an AC outlet for
the first time, DEMO appears on the display.
To deactivate the DEMO, press DEMO/ECO.
•Do not short-circuit the 0 and 9 speaker cord leads.
•Do not leave objects generating magnetism or objects
affected by magnetism near the speakers.
To position the surround speakers (only for NSX-
AJ503)
Position the surround speakers behind the listening area to
make the most of the surround effect.
To mount the surround speakers on the wall (only
for NSX-AJ503)
Mount each speaker on a spot that can hold its weight.
AIWA disclaims any responsibility for injury to persons
or other accidents caused by not fitting the surround
speakers properly or if the place of the installation is
not suitable.
Connection
Plug in the AC power cord to the AC power outlet after all other
connections are made.
1
Connect the front speakers.
Connect the right front speaker to the SPEAKERS R
terminals and the left to the SPEAKERS L terminals. The
speaker cords with the white stripes go to the 0 terminals.
2
Connect the surround speakers (only for NSX-
AJ503).
Connect each surround speaker cord to the SURROUND
SPEAKERS R jack or the SURROUND SPEAKERS L jack.
01NSX-AJ500/AJ503(U)/Eng 12/22/00, 3:51 PM4